Who has the quickest japanese car in Eastern Cars?

Discussion in 'OT Driven' started by EK9BEEZLER, Jun 5, 2008.

  1. EK9BEEZLER

    EK9BEEZLER New Member

    Joined:
    Feb 17, 2008
    Messages:
    20
    Likes Received:
    0
    Location:
    San Diego, CA
    Seems like there are some pretty knowledgeable people on here and I bet there are some quick cars. Who wins?

    I'm sure I'm not the quickest but my civic is pretty fun.

    2200 lbs and 339 whp. I would guess high 11's on a nice drag radial. I don't have track times so I won't contend.

    [​IMG]

    [​IMG]

    Piston/rod CTR motor and a t3/t4
     
  2. deusexaethera

    deusexaethera OT Supporter

    Joined:
    Jan 27, 2005
    Messages:
    19,712
    Likes Received:
    0
    Nice. Flicking off the camera in your Honda Civic. Very classy, I bet you get all the bitches with that move.
     
  3. EK9BEEZLER

    EK9BEEZLER New Member

    Joined:
    Feb 17, 2008
    Messages:
    20
    Likes Received:
    0
    Location:
    San Diego, CA
    Lol that's all you could come up with? You must have a lot of friends. :coolugh:

    I was up on a mountain run with some friends and was joking around. I guess that makes me a total douche. My girlfriend of 4 years seems to think I'm classy enough. :fawk:
     
  4. PanzerAce

    PanzerAce Active Member

    Joined:
    Feb 25, 2006
    Messages:
    14,502
    Likes Received:
    0
    Location:
    N37°18'37" W120°29'50"
    When I actually get done with mine, I wouldn't be surprised if it is top-5 :hsd:

    still a LONG way to go though :wtc:
     
  5. deuceforty

    deuceforty between rupture and rapture

    Joined:
    Feb 9, 2003
    Messages:
    10,128
    Likes Received:
    0
    Location:
    35 inch vertical jump > you
    i honestly have NO idea...

    250 whp and 280 ft lbs. tq at 12psi...
     
  6. S13Koop

    S13Koop OG Lurker

    Joined:
    Mar 15, 2000
    Messages:
    1,785
    Likes Received:
    0
    Location:
    Houston, TX
    302hp
    265tq
    1jz vvti @ 15psi
    :dunno:
     
  7. Hahawhat?

    Hahawhat? New Member

    Joined:
    Jan 11, 2008
    Messages:
    447
    Likes Received:
    0
    [​IMG] 533AWHP but that was on 31PSI and and as a manual

    Not sure if it is the fastest but it definently moves 3100-3200lbs with me in it, AWD and now it is a push button auto only running 27PSI. Still should run mid to low 11's and if I get a nice run and up the boost again I might nip a high 10 second run. Oh forgot 1990 Eclipse GSX
     
    Last edited: Jun 5, 2008
  8. EK9BEEZLER

    EK9BEEZLER New Member

    Joined:
    Feb 17, 2008
    Messages:
    20
    Likes Received:
    0
    Location:
    San Diego, CA
    damn. winnar!
     
  9. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,124
    Likes Received:
    748
    Location:
    Home of the Texas Rangers
    3224 pounds, 255 hp. Supposed to run a high 14 stock, several 5.5 gen Maximas with automatics (like I have, couldn't find a 6 speed) are into the 13s with just basic bolt ons. Haven't heard of any quicker than mid 12s though.
     
  10. Hahawhat?

    Hahawhat? New Member

    Joined:
    Jan 11, 2008
    Messages:
    447
    Likes Received:
    0
    [​IMG] engine bay shot JMF SMIM, Tial wastegate and BOV, 100cc injectors, yada yada

    [​IMG] wideband, turbo timer, meth/high boost switch in the low boost position

    [​IMG] turbo set-up FP 3065 with FP 2.5' O2 housing and 3' exhaust

    [​IMG] FMIC from ETS

    [​IMG] My "stock" car

    [​IMG] meth set-up so I can run 25+PSI on shitty 91 octane
     
  11. PanzerAce

    PanzerAce Active Member

    Joined:
    Feb 25, 2006
    Messages:
    14,502
    Likes Received:
    0
    Location:
    N37°18'37" W120°29'50"
    That intake plenum makes my eyes bleed. I don't suppose you bothered to flow test it? :hsd:
     
  12. nsxrebel

    nsxrebel New Member

    Joined:
    May 22, 2006
    Messages:
    3,272
    Likes Received:
    0
    I thought this was a who has the quickest japanese car thread, not who has the most Hp.

    Hahawhat, those are some impressive numbers, too bad you have a 1st Gen, I like the 2nd Gen the most, anything after that is just fugly.

    Deuce, 12psi and 250 is the best you could do? what do you drive?
     
  13. deuceforty

    deuceforty between rupture and rapture

    Joined:
    Feb 9, 2003
    Messages:
    10,128
    Likes Received:
    0
    Location:
    35 inch vertical jump > you
    240sx its not slow... especially around corners and shit

    4.36 final gear, full suspension, lightweight flywheel, exedy stage 1 clutch, no clutch fan etc.

    it weighs 2550 lbs.

    its just a t25 till the engine is done being built

    then goes on the GT3038s
     
  14. nwmrkt

    nwmrkt New Member

    Joined:
    Dec 31, 2004
    Messages:
    2,254
    Likes Received:
    0
    Location:
    Ontario, Canada
    ka-t baby
    s14 right? is it gutted? didnt know it weighed so little?
    I have a s14 zenki.
     
  15. nwmrkt

    nwmrkt New Member

    Joined:
    Dec 31, 2004
    Messages:
    2,254
    Likes Received:
    0
    Location:
    Ontario, Canada
    btw op, clean civic
     
  16. deuceforty

    deuceforty between rupture and rapture

    Joined:
    Feb 9, 2003
    Messages:
    10,128
    Likes Received:
    0
    Location:
    35 inch vertical jump > you
    yeah, s14

    thats the weight without me in the car..

    it lost ALOT of weight just from swapping stuff out...

    starion wheels are light as hell, z32 alum rear uprights, s15 alum front uprights
     
  17. nwmrkt

    nwmrkt New Member

    Joined:
    Dec 31, 2004
    Messages:
    2,254
    Likes Received:
    0
    Location:
    Ontario, Canada
    if you dont mind would you please give a list of all the "weight reduction" mods you did?

    Thanks
     
  18. deuceforty

    deuceforty between rupture and rapture

    Joined:
    Feb 9, 2003
    Messages:
    10,128
    Likes Received:
    0
    Location:
    35 inch vertical jump > you
    its a huge list of stuff... i seriously have 12k into that car
     
  19. dguy

    dguy She smells like angels ought to smell.

    Joined:
    Oct 28, 2004
    Messages:
    4,686
    Likes Received:
    0
    Location:
    Santa Barbara, CA
    I'd be pretty sad if high 11s was the fastest eastern import :(
     
  20. Hahawhat?

    Hahawhat? New Member

    Joined:
    Jan 11, 2008
    Messages:
    447
    Likes Received:
    0
    All of JFM's stuff is flow tested and it made great gains from the stock one, I'm very happy with it and mid-range wasn't sacraficed.
     
  21. Hahawhat?

    Hahawhat? New Member

    Joined:
    Jan 11, 2008
    Messages:
    447
    Likes Received:
    0

    It was trapping high 126-128MPH which is right about where the average crotch rocket (600) runs stock with a normal rider. That was before the detune and switch to an auto. Like I said, I hoping for high 10's this year on a 100% street car running 91 octane and meth injection no nitrous.
     
  22. PanzerAce

    PanzerAce Active Member

    Joined:
    Feb 25, 2006
    Messages:
    14,502
    Likes Received:
    0
    Location:
    N37°18'37" W120°29'50"
    Really? I guess it just doesn't look that smooth to me. Seems like you might be losing some airflow to the #1 piston. :dunno:

    I guess stuff like this just looks more....right....to me:
    http://forums.hybridz.org/showthread.php?t=127863

    the end result (basically):


    [​IMG]

    [​IMG]

    [​IMG]
     
  23. Hahawhat?

    Hahawhat? New Member

    Joined:
    Jan 11, 2008
    Messages:
    447
    Likes Received:
    0
    If you look at the pic you can see it angles down towards the last runner like a Magnus. I'll see if I can get a better pic. [​IMG] maybe you can see the angle in the picture.
     
  24. PanzerAce

    PanzerAce Active Member

    Joined:
    Feb 25, 2006
    Messages:
    14,502
    Likes Received:
    0
    Location:
    N37°18'37" W120°29'50"
    No, I see what you are saying, but to my eyes, it looks like you are going to get a high pressure zone on the cylinder farthest from the TB. Admittedly, I don't know what the inside of the plenum looks like, but it doesn't look like that good of a design to me :dunno:
     
  25. Dweezil

    Dweezil New Member

    Joined:
    Jun 5, 2008
    Messages:
    123
    Likes Received:
    0
    Location:
    at altitude
    I miss this car.

    [​IMG]


    Burnout/heating up the tires video is here.

    The dyno was done at 24psi. The car ran at 30psi most of the time. :)

    [​IMG]
     
    Last edited: Jun 15, 2008

Share This Page