LGBT where can i find more Men's belts like these:

Discussion in 'Lifestyle' started by tommyortom, Nov 16, 2004.

  1. tommyortom

    tommyortom New Member

    Joined:
    Sep 2, 2003
    Messages:
    14,185
    Likes Received:
    0
    Location:
    The Real O.C.
    rubber or leather belts with prints on them, stuff similar to these:
    [​IMG]
    [​IMG]

    any positive input would be appreciated
     
  2. DatacomGuy

    DatacomGuy is moving to Canada

    Joined:
    Oct 14, 2002
    Messages:
    16,546
    Likes Received:
    0
    Location:
    Tampa, FL
  3. boiwunder

    boiwunder New Member

    Joined:
    Jul 10, 2002
    Messages:
    1,626
    Likes Received:
    0
    Location:
    Las Vegas
    Pacific Sunwear, Hot Topic
     
  4. spiffy_badrock

    spiffy_badrock I'm sorry, if you were right, I'd agree with you.

    Joined:
    Jul 18, 2004
    Messages:
    1,340
    Likes Received:
    0
    Location:
    Floatin' Through The Mangroves
    couldnt you take a cheap belt and do a laquer thinner transfer....if you dont kill yourself, you should get a simliar result.
     
  5. tommyortom

    tommyortom New Member

    Joined:
    Sep 2, 2003
    Messages:
    14,185
    Likes Received:
    0
    Location:
    The Real O.C.
    more details please?
     
  6. spiffy_badrock

    spiffy_badrock I'm sorry, if you were right, I'd agree with you.

    Joined:
    Jul 18, 2004
    Messages:
    1,340
    Likes Received:
    0
    Location:
    Floatin' Through The Mangroves
    Its pretty simple, create whatever you want to transfer on a computer, print it, wet the paper in laquer thinner, then press it on for a good while. In theory, the thinner will help pull the ink out and onto whatever surface your mashing it against. Im not sure if it will work with belts, but I guess its worth a try. Ive seen someone do a transfer before, and many artists frown on it for health reasons, to get more exacting results, just do a google search for "Laquer Thinner Transfer" or "Laquer Transfer". The only major roadblack I see is getting good constant pressure , mashing the two toghether, most people Ive talked to run it through a manual printing press I belive....I could be wrong.
     

Share This Page