GUN what compliance parts for my romy g?

Discussion in 'On Topic' started by twofourtysx, Dec 8, 2007.

  1. twofourtysx

    twofourtysx New Member

    Joined:
    Aug 19, 2002
    Messages:
    13,091
    Likes Received:
    0
    Location:
    CA
    I want to keep the original pg so most of the compliance kits are out of the question. I was looking at:


    (AKFLSH1) Bird cage style Flash hider AK-47


    (AKUS2TRGTAP) US Made G-2 Trigger Group Double Hook


    (AKUSPSTNCEN) AK-47 US Made Full Length Gas Piston by Century


    I knkow the single hook tapco doesnt work on the NDS3 but will the double hook?
     
  2. Keesh

    Keesh New Member

    Joined:
    Oct 26, 2003
    Messages:
    15,333
    Likes Received:
    0
    You need 6. Your receiver counts a 1, You can get a G-2, I've put single hook G-2s in NDS3s with no problems, there's an easy fix shown on Nodak's website if it doesn't work. If you get a double hook you're going to have to cut another notch which always ends up looking sloppy. the fire control group counts as 3 and if you get the bird-cage flash hider and gas piston, you're at the required amount of 6.

    When you're replacing the piston, there's a little rivet that you have to drill out then you just unscrew it. When you replace it you don't want to screw it in too tight, it should be able to wiggle around a little bit. This will ensure it doesn't bind up inside the gas tube.
     

Share This Page