? what amp size for 2 JL 10W4

Discussion in 'OT Technology' started by turbobaja, Mar 8, 2002.

  1. turbobaja

    turbobaja All in time....

    Joined:
    Aug 2, 2000
    Messages:
    865
    Likes Received:
    0
    Location:
    Austin, TX, US
    I was able to get a pair of these for cheap. They are going in my MR2 behind the seat. I have several amps laying around to power them but I am wondering what would be close to ideal while not spending a lot of money to poewr the subs.

    I have:

    Profile Baja 300
    @ 4 ohms: 75x2, 150x2 Max
    Bridged @ 4 ohms: 150x2, 300x2 Max

    Sony Mobile ES XM-3546 Specs
    @ 4 ohms: 35x4, 130x2 (14.4 volts) (not sure if these are max values or not)

    Eclipse 3241
    Only rating I could find is 50x4 rms

    Kenwood KAC-X401M monoblock sub amp Specs
    -Maximum Output Power: 1200 Watts x 1
    - Power Output at 2 Ohms, at 12V (1kHz, 0.5% THD): 400 Watts x 1
    - Power Output at 2 Ohms, at 14.4V (1kHz, 0.5% THD): 600 Watts x 1
    - Power Output at 4 Ohms, at 12V (20Hz-20kHz, 0.05% THD): 200 Watts x 1
    - Power Output at 4 Ohms, at 14.4V (20Hz-20kHz, 0.05% THD): 300 Watts x 1


    My goal is to put in my mb quart 6.5 components in front and have the 2 subs behind the seats. I'm currently using my head unit, Pioneer DEH-P7300, as my EQ. Since I was able to pick everything up for pretty cheap I understand it can be better but would like to use what I have.

    Oh and also the specs I could find for the subs are 200 rms.

    Thanks for any input.
     

Share This Page