VBand Issues

Discussion in 'OT Driven' started by RyaN95i4, Dec 6, 2006.

  1. RyaN95i4

    RyaN95i4 We are the boys from old Florida

    Joined:
    May 30, 2000
    Messages:
    17,512
    Likes Received:
    3
    Location:
    Florida
    If its not one thing, its another...

    Im using a Holset HX40 turbo with a Bullseye Power turbine housing. I opted for the vband adapter BEP sells as well.

    Well, BEP hasnt been able to source vband's for a couple months now, so I went outside BEP to buy a vband flange for the downpipe and clamp.

    The issue now is the 3" inside diameter Vband flange on the BEP housing has a larger outside diameter than the 3" ID flange I bought.

    Picture for reference:

    http://gfmotorsports.net/misc/vband.jpg

    The BEP flange has an 3.75" OD

    The shop I bought the smaller flange from does not have anything with that size OD -- Does anyone know where I can source a vband flange/clamp with a 3.75" OD?
     
  2. S13Koop

    S13Koop OG Lurker

    Joined:
    Mar 15, 2000
    Messages:
    1,785
    Likes Received:
    0
    Location:
    Houston, TX
    Have you tried diesel parts store like Cummins, Caterpillar (Mustang), Stewart and Stevenson?
     

Share This Page