Turbocrew Check in! What you got how much boost?

Discussion in 'OT Driven' started by MR. Marti, Jun 14, 2006.

  1. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    Seems that lots of OT is boosted. What kind of snails you running? What kind of boost?

    I'll start:
    Just Sold: PTE SCM44 (60trim compressor, T31 turbine wheel)
    ran about 18psi and hit hard. Never made it to the Dyno.

    On the way to me now:
    Borg Warner Custom S200 from my boys at Bullseye Power
    58mm compressor, P-trim turbo in a Stainless Steel DSM Bolt-on turbine housing. Hoping to set it up for about 24psi on the street on pump gas with alky. 4" inlet, map width enhancement grove cover and extended tip compressor wheel! 500whp on pump here i come.
     
  2. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    where's the boost?
     
  3. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
  4. bigboostdsm

    bigboostdsm New Member

    Joined:
    May 19, 2006
    Messages:
    7,989
    Likes Received:
    0
    Location:
    Rocky Top, TN
    PTE 5031e 25psi daily/pump gas 30psi track/race gas

    Taking it to the dyno this week :big grin:
     
  5. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    did you buy it from me? if not you should have. lol

    that is a great turbo. what kind of setup are you on that you run it at 25psi?
     
    Last edited: Jun 14, 2006
  6. Cyrus.

    Cyrus. Swollen Member

    Joined:
    Nov 25, 2002
    Messages:
    3,170
    Likes Received:
    0
    Location:
    Halifax, NS.
    I ran a pte 61 on a dswm, spiked it to 35psi once to see if it would blow.
     
  7. DeeRock

    DeeRock New Member

    Joined:
    Feb 23, 2006
    Messages:
    533
    Likes Received:
    0
    Location:
    Orange County/Bellevue, Wa
    15 psi on a t25!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     
  8. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    wow you must hate life. lol i remember those days.
     
  9. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    come on folks. i know there are a lot more boost addicts than this.
     
  10. spook

    spook OT Supporter

    Joined:
    Feb 14, 2006
    Messages:
    3,370
    Likes Received:
    0
    I picked up a 1991 Galant VR4 yesterday, 10 little pounds on a new 14b.

    904/2000
     
  11. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    congrats!
     
  12. D21X

    D21X Ownz JOO

    Joined:
    Mar 16, 2000
    Messages:
    961
    Likes Received:
    0
    Location:
    Madison, Wisconsin
    used to run T25 @6psi on a Honda.....
     
  13. The Mafia

    The Mafia New Member

    Joined:
    May 19, 2006
    Messages:
    1,226
    Likes Received:
    0
    Location:
    Australia
    [​IMG]
    [​IMG]
    [​IMG]
    Its a Garrett GT30 with the TO4S 7 blade wheel. Comes on hard. Running it at 17psi. Capable of 550hp. Got a .63 back end on it, which restricts the top end a little, but it comes on early which makes the car fun. Got a 4 inch Bell mouth, and a .7 ar front.

    And the good thing about it is the cops can get fucked, ebcause you can't see it...
    [​IMG]
     
  14. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    i thought the T2 turbine assembly only came in 68 and 84 a/r? Either way that 30 is one i have used before for a customer if i remember correctly it made about 433awhp at about 24psi (2g DSM)
     
  15. MR. Marti

    MR. Marti New Member

    Joined:
    Mar 19, 2004
    Messages:
    14,193
    Likes Received:
    0
    Location:
    Central Florida
    night crew to the rescue?:x: :x: :dunno:
     
  16. TazzSLC

    TazzSLC I Do What The Old Heads Taught Me...

    Joined:
    Jan 1, 2006
    Messages:
    629
    Likes Received:
    0
    Location:
    Salt Lake City, UT
    12.7psi on a 14b bitches........ Mid 13's at 4200' Feet Elevation. Fuck off, thanks :bowdown:
     
  17. 4g63punk

    4g63punk New Member

    Joined:
    Jun 6, 2006
    Messages:
    56
    Likes Received:
    0
    Fuck that he was on the bottle... lol :rofl:

    16 psi. + Big 16g + a boost controller + 3" exhaust+ street tires= mid 14's at 4200 ft. elevation. in a fwd dsm.. :fawk:
     
  18. StylishDOHC

    StylishDOHC New Member

    Joined:
    Nov 5, 2005
    Messages:
    7,141
    Likes Received:
    0
    Location:
    Eugene,Oregon
    11 lbs, Garrett t3/to4e 50 trim wheel in a .60 A/R compressor housing.... .48 A/R turbine housing.
     
  19. Milin

    Milin It's Terminal.

    Joined:
    Nov 13, 2001
    Messages:
    5,918
    Likes Received:
    0
    Location:
    Bay Area CA
    vf30 with 18psi.

    sold. now at td04...who cares what psi its my commuter car now.

    next car will eventually have a GT35R on it so I can pwn my friend's evo.
     
  20. bigboostdsm

    bigboostdsm New Member

    Joined:
    May 19, 2006
    Messages:
    7,989
    Likes Received:
    0
    Location:
    Rocky Top, TN
    Bought it off of DSMtalk from a member. Didn't have the money for new.

    I'm running a bone stock bottom end with no balance shafts, ARP headstuds, mitsu mls HG, FP2x cams, 850cc injectors, aeromotive afpr, wally 255, DSMlink (Best purchase ever), and a few other little goodies but those are the big ones.

    Rock steady timing advance, no knock, and solid 11.4afr till redline. Should have some dyno sheets in the next couple weeks :big grin:
     
  21. Tom93R1

    Tom93R1 Member

    Joined:
    Aug 16, 2004
    Messages:
    411
    Likes Received:
    0
    Location:
    Tempe, AZ
    My stock Chevy Sprint Turbo runs about 6 psi through its 1.0 3 cylinder motor
     
  22. headrec

    headrec OT Supporter

    Joined:
    Jun 12, 2006
    Messages:
    545
    Likes Received:
    2
    Location:
    Ogden, Utah
    Talon running about 23 psi on racegas with a stock 14b. Felt pretty quick and track day was cancelled so I haven't had a chance to run it then or since.

    Still needs more mods before I consider it quick but its fun for now.
     
  23. tecknic

    tecknic OT Supporter

    Joined:
    Sep 16, 2004
    Messages:
    132
    Likes Received:
    0
    td06 @ 15 psi.
    13.1 sec 1/4
    mr2
     
  24. Eclipsed830

    Eclipsed830 Active Member

    Joined:
    Jul 7, 2005
    Messages:
    39,507
    Likes Received:
    0
    Location:
    San Francisco/Cleveland
    60-1, 32psi, stock 6bolt... :rofl:
     
  25. Subie Driver

    Subie Driver Eye see what you did there.

    Joined:
    May 6, 2001
    Messages:
    5,641
    Likes Received:
    1
    Location:
    Beaverton, OR
    Garrett GT28 running 4 psi right now, should be able to give me a safe 6 psi after I get it tuned. This is on my 2000 Impreza 2.5RS, still running the stock 10:1 compression ratio, so can't run much more boost than that without really risking the motor. AVO turbo kit, by the way.
     

Share This Page