GUN Those with Vltor Carbine Standard Modstocks

Discussion in 'On Topic' started by Sardaukar, May 6, 2008.

  1. Sardaukar

    Sardaukar Active Member

    Joined:
    May 3, 2005
    Messages:
    7,194
    Likes Received:
    1
    Careful when you're performing REMEDIAL ACTION (Thanks, Tbear. :mamoru:). This could happen.

    [​IMG]

    [​IMG]


    I had a case get stuck in the chamber. So I pulled on the charging handle while slamming the butstock onto the ground. Cleared the jam as expected, but broke off the little tip on the end of the stock. :mamoru: This does not apply to the clubfoot models.
     
    Last edited: May 6, 2008
  2. Keesh

    Keesh New Member

    Joined:
    Oct 26, 2003
    Messages:
    15,333
    Likes Received:
    0
    Well that one is ruined. You better buy a new one and send the broken one to me.
     
  3. Sardaukar

    Sardaukar Active Member

    Joined:
    May 3, 2005
    Messages:
    7,194
    Likes Received:
    1
    I gave it a quick thought after it happened. It works fine without the nub. No need to spend another $100 or so on a new one. :fawk:
     
  4. yar1182

    yar1182 New Member

    Joined:
    Mar 26, 2008
    Messages:
    4,852
    Likes Received:
    0
    Location:
    Ventura California
    clean it up with a dremel and if anyone asks just say you modified it on purpose. One less thing to snag.
     
  5. Sardaukar

    Sardaukar Active Member

    Joined:
    May 3, 2005
    Messages:
    7,194
    Likes Received:
    1
    There's a thought.
     

Share This Page