GUN This drop-in work for a 623FA?

Discussion in 'On Topic' started by Thunderbear, Jul 13, 2009.

  1. Thunderbear

    Thunderbear Yggdrasil's Forester.

    Joined:
    Sep 23, 2001
    Messages:
    17,946
    Likes Received:
    1
    Location:
    -Tick tock, tick tock til Ragnarök-
  2. 2L Bunny

    2L Bunny "It's only a Rabbit"

    Joined:
    May 18, 2001
    Messages:
    1,673
    Likes Received:
    0
    Location:
    OR
  3. THT

    THT The easy way is always mined

    Joined:
    Mar 16, 2005
    Messages:
    12,748
    Likes Received:
    0
    Location:
    The booby hatch
    Try it and report back. If it works, I'd grab one for mine.
     
  4. The Cable Guy

    The Cable Guy New Member

    Joined:
    Jul 10, 2006
    Messages:
    16,075
    Likes Received:
    0
    Location:
    Rowland Heights, CA
    I wouldn't recommend a 5-mode module for something that will utilize a momentary on pressure switch.

    They have some that are single mode. otherwise, it will fit. At first, it will seem like it doesn't fit right. You may need to sand down the module a little bit. I had to do it with my CREE Q5 on my 618FGA.
     
  5. Thunderbear

    Thunderbear Yggdrasil's Forester.

    Joined:
    Sep 23, 2001
    Messages:
    17,946
    Likes Received:
    1
    Location:
    -Tick tock, tick tock til Ragnarök-
    My Fenix is a 5 way, and I like it. Not sure if I want the 1 mode superbright, or the 5 mode and just leave it on the bright setting. I like the versatility of the 5 mode.
     
  6. The Cable Guy

    The Cable Guy New Member

    Joined:
    Jul 10, 2006
    Messages:
    16,075
    Likes Received:
    0
    Location:
    Rowland Heights, CA
    Yeah, that would work if you're only using the constant on. With the pressure switch though, everytime you activate it, it'll be on a different mode. Just a suggestion.
     
  7. Captain Haddock

    Captain Haddock Blistering Barnacles OT Supporter

    Joined:
    Jun 2, 2003
    Messages:
    37,420
    Likes Received:
    0
    Location:
    York, PA
  8. The Cable Guy

    The Cable Guy New Member

    Joined:
    Jul 10, 2006
    Messages:
    16,075
    Likes Received:
    0
    Location:
    Rowland Heights, CA
  9. Thunderbear

    Thunderbear Yggdrasil's Forester.

    Joined:
    Sep 23, 2001
    Messages:
    17,946
    Likes Received:
    1
    Location:
    -Tick tock, tick tock til Ragnarök-
    Motherfuck, DX is paypal only?
     
  10. kellyclan

    kellyclan She only loves you when she's drunk.

    Joined:
    May 16, 2001
    Messages:
    18,944
    Likes Received:
    0
    AFAIK, none of the P60 drop ins fit the Weaponlight assemblies for some reason, but I never looked into why that was. Could be wrong.
     
  11. The Cable Guy

    The Cable Guy New Member

    Joined:
    Jul 10, 2006
    Messages:
    16,075
    Likes Received:
    0
    Location:
    Rowland Heights, CA
    They don't sit "correctly" in the lights, I sanded mine down a little bit since it wasn't lighting up. Then I realized that my forend was just turned off. Otherwise, it fits for me, just going to be a pain to get it off.
     

Share This Page