GUN So my trusty 10/22 failed me today :wtc: need repair helpz

Discussion in 'On Topic' started by jls, May 28, 2008.

  1. jls

    jls New Member

    Joined:
    Apr 18, 2004
    Messages:
    13,652
    Likes Received:
    0
    Location:
    SC
    decided to take it along to the range today to slow my 9mm consumption :o

    first time i've shot it in a few months, and the trigger doesnt reset, not a single time, i just have to push it forward with my finger... I cleaned it and took apart as much of the trigger assembly as I thought I could put back together :o and cleaned it up, it resets fine when cycling it manually but still not when firing

    The trigger has a good bit of take up, i've never messed with it, what do I do :hsd:
     
  2. mattsb2000

    mattsb2000 OT Supporter

    Joined:
    Jun 15, 2003
    Messages:
    61,666
    Likes Received:
    1
    Location:
    San Bernardino, CA
    Dirty? Broken return spring? User error?
     
  3. jls

    jls New Member

    Joined:
    Apr 18, 2004
    Messages:
    13,652
    Likes Received:
    0
    Location:
    SC
    no no and I dont see how
     
  4. mattsb2000

    mattsb2000 OT Supporter

    Joined:
    Jun 15, 2003
    Messages:
    61,666
    Likes Received:
    1
    Location:
    San Bernardino, CA
    Take the trigger group out and look at it.


    I was mostly serious / fucking with you :hsd:
     
  5. xpinchx

    xpinchx hes got a nice cock, on the thin side but its stil

    Joined:
    Dec 18, 2003
    Messages:
    46,800
    Likes Received:
    0
    Location:
    East Lansing, MI
    Sounds like the return spring isn't working right. :dunno:

    /obvioussuggestion
     
  6. chakup

    chakup Guest

    return spring- either get a new one or do the bobby pin trick.
     
  7. jls

    jls New Member

    Joined:
    Apr 18, 2004
    Messages:
    13,652
    Likes Received:
    0
    Location:
    SC


    elaborate prease


    also any way to tell? trigger pull is still pretty heavy, spring is strong and this gun has only see 4-500 rnds i dont see how it could be this
     
  8. Keesh

    Keesh New Member

    Joined:
    Oct 26, 2003
    Messages:
    15,333
    Likes Received:
    0
    wtf is up with all these 10/22 problem threads. THere's like 3 on the first page :rofl:

    Hope you get yours fixed :hs:
     
  9. xpinchx

    xpinchx hes got a nice cock, on the thin side but its stil

    Joined:
    Dec 18, 2003
    Messages:
    46,800
    Likes Received:
    0
    Location:
    East Lansing, MI
    Yeah I thought the same thing. :rofl:
     
  10. chakup

    chakup Guest

    Trigger return spring you have to disassemble all the way. go in punch out all the pins and pull everything out- just do it and get it over with. it's really pretty easy to get back together.
    http://www.rimfirecentral.com/forums/showthread.php?p=1295888#post1295888
     
  11. jls

    jls New Member

    Joined:
    Apr 18, 2004
    Messages:
    13,652
    Likes Received:
    0
    Location:
    SC
    well i took the trigger group apart completely, cleaned it and reassembled, didnt have a bobby pin to try that, but the trigger was resetting with a positive click after I put it back together, until I put it into the stock. Once I had it in the stock it wasnt resetting again. I took it apart and put it back together and it seems to be working fine now, even in the stock

    WTF is going on :noes:

    It functioned perfect through 5 rnds in my back yard, about to head to the range and see whats up, wish me luck :o
     

Share This Page