FRK Self Casting - Part 2

Discussion in 'Vaginarium' started by Smoked, Apr 19, 2005.

  1. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    I checked the phone book, and wouldn't ya know it?
    There's a local mold supply shop with everything you can imagine for molding or casting in about any medium.

    I ran down on lunch and told them I was hired to prototype some items for a fledgling bachelorette party company.

    Then ensued a interesting series of discussions where we danced around the issue of what I'd really be making (if there's hair involved *looks down his glasses at me* you don't wanna use THIS, hahaha) and focused on the human friendly aspects of the products available.

    I ended up with some ALJA-SAFE to make molds with.
    This is a refined powder made from sea weed. It's water based and completely human friendly.

    I also selected some "Dragon Skin" a two part silicone based rubber liquid that when mixed and cured gives that slightly spongy yet still firm rubber feel that most commercial sex toys seem to be made of. (I got to play with a sample and it sure felt like the same stuff.) This is the same material used for special effects. He claimed the budweiser frogs were made from "dragon skin".

    I opted out of the flesh tone colored pigment since it was $12 a jar.

    Hopefully I'll get a chance to play around and test some stuff tonight to see if it'll work.
     
  2. Improvolone

    Improvolone New Member

    Joined:
    Mar 20, 2005
    Messages:
    3,843
    Likes Received:
    0
    Tres sweet


    I want an entire body cast of myself
     
  3. Phantom Empress

    Phantom Empress mmmmmm tasty!!!

    Joined:
    Dec 10, 2001
    Messages:
    52,552
    Likes Received:
    0
    Location:
    Miramar, FL
    COOL omg how much did this run you? If I can get some for cheaper than one of those kits i'd rather mold one of Tigre the DIY way than spend money on a ghetto kit.
     
  4. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    too much.

    If you can get the trial size alja-safe it's $10 and the dragon skin trial size was about $20 ish.

    I couldn't get the trial size alja-safe and had to buy a 3 pound box.

    So basically I have about the cost of a ghetto kit in it so far, except I can make a zillion molds and maybe 2 - 3 casts. (which IMHO is better than one shot and go buy another kit if ya fuck it up)

    The bad part is that I'm not positive the materials will work properly together yet. I'll have to test.

    The good news is I've got enough alja-safe to sell some off if it works.

    If you can find the dragon-skin locally, I'm sure we can work out a deal.

    Assuming of course that I don't burst into flames when I try this...
     
  5. Improvolone

    Improvolone New Member

    Joined:
    Mar 20, 2005
    Messages:
    3,843
    Likes Received:
    0
    Well, I hope you get pictures no matter the outcome. Bursting into flames or not.
     
  6. Phantom Empress

    Phantom Empress mmmmmm tasty!!!

    Joined:
    Dec 10, 2001
    Messages:
    52,552
    Likes Received:
    0
    Location:
    Miramar, FL
    Well yeah I want to make a mold and make a couple different things out of it.. A Vibe, a Dildo, a Plug type thingy and a Penis shapped gag.
     
  7. NYM3

    NYM3 Is this teal life or is it....fanta-sea?

    Joined:
    May 4, 2001
    Messages:
    61,064
    Likes Received:
    669
    Location:
    Gunshine state
    Yeah most arts & crafts type stores will carry stuff that will work just fine...and pretty cheaply.

    If you cant find the material to make the mold....try a dental supplier...its the same stuff they use to make molds.
     
  8. David02

    David02 Guest

    Haha only in FS! Way to go 420! Let us know how it works out!
     
  9. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    I have no help tonight, but maybe tomorrow...
     
  10. Improvolone

    Improvolone New Member

    Joined:
    Mar 20, 2005
    Messages:
    3,843
    Likes Received:
    0
    SHIT
    No fair
     
  11. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    I cannot vouch for this.

    I checked a craft, and an art supply store, they both had mostly acetone or solvent based products.

    Not the things I'd want to use on myself or internally for the SO.

    There was a reason I ended up at an industrial supplier.
     
  12. Chewbs

    Chewbs Swollen Member

    Joined:
    May 17, 2004
    Messages:
    43,726
    Likes Received:
    0
    Location:
    Philly Philly it is where I am from
    Skin safe stuff is hard to find, I checked two big art supply stores in center city Philadelphia one day and turned up nothing. Your best bet fo finding this type of stuff would be the internet or a supplier like 420 found.
     
  13. saxman

    saxman Burninating the peasants

    Joined:
    Dec 2, 2001
    Messages:
    15,368
    Likes Received:
    17
    Location:
    Palmdale, Ca
    didn't catch the first thread, but I've used a product called dermagel for making life casts... purchases from artstuf.com... it's not very expensive either...

    they also carry several different silicone products for casting the final part
     
  14. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    That's an alginate as well. I think as long as it's alginate it doesn't matter what brand you use. I'm 99% positive it's the same they use in the kits. The problem seems to be finding the right casting compound that's not latex based as a lot of poeple have allergic reactions.
     
  15. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    Me too,

    Except taller...

    *rimshot*
     
  16. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    OK, I got some stuff done last night.

    The stuff in the kit I used was a 1:1 mix.
    1.5 cups of mix to 1.5 cups 98 degree water.
    The end product was a lot like lumpy white jello when cured and tended to sweat the water back out of the mold as it sat. That's probably why they said to let it sit and dry for a couple of hours.

    I mixed up several different batches of the ajga-safe to test with.

    Alja-safe recommends a 1:1 mix ratio at about 80 degress.
    When doing this it hardens within 6 mins of first mixing, but it turned into a damn near rubber like substance. It was very very stiff and purple.
    (hehehe you said stiff and purple)
    Too firm, I thought, to encase my member in without potential trauma.

    Second batch was 2:1 water and alja-safe, upped the temp to 98 degrees
    still pretty damn thick but it setup within 4.5 mins after mixing.

    Third batch was 3:1 water and alja-safe, but I found out I'd measured the mix wrong, and also didn't check the temp of the water, I just adjusted the tap till it was slightly warmer than my fingers. Later on I checked my "adjusted" water a couple of times and it always came out somewhere between 85 and 95 degress.
    Wouldn't ya know?
    The time I fucked it all up, it came out exactly like the kit did with a slight purple tint instead of white.

    Some additional playing later I finally came up with what I'm gonna use.
    It's just slightly thicker than the kit was, making it easier to remove yourself without damaging the mold. And still geletin enough to not worry about getting anything stuck.

    Final Formula for Alja-Safe
    2/3 cup alja-safe to 1.5 cups warm water between 85 and 95 degrees.
    stir briskly until it is just starting to thicken or get soupy, pour into mold, slam, wait for 3 mins or so.

    A couple of things:
    Once the process of setting starts, it happens fast. It pretty much goes from soup to solid within 60 secs, so if there's any question at all about timing, plan on getting messy just so you don't ruin the batch.

    The Alja-Safe is by far a better product than whatever was in the kit. It doesn't take as much mix. It mixes more thoroughly and it doesn't sweat as much water back out as the other stuff did. I highly recomend it.

    Now after all that mixing, cleaning, mixing, and cleaning...
    The wife wanted some attention, so nothing else productive got done.
    Well, not for your benefit anyway.

    We'll see how things go for the next couple of days.
     
  17. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    Didn't get anything sexually constructive done last night, so no update today.

    Is the interest waning here?

    Should I keep updating?
     
  18. Improvolone

    Improvolone New Member

    Joined:
    Mar 20, 2005
    Messages:
    3,843
    Likes Received:
    0
    Do indeed
     
  19. naughtie

    naughtie New Member

    Joined:
    Jan 21, 2005
    Messages:
    7,659
    Likes Received:
    0
    Location:
    U.S.A.
    yes, do indeed. I want to learn from your mistakes before I go out and try this. :)
     
  20. zx3 Phil

    zx3 Phil New Member

    Joined:
    May 27, 2003
    Messages:
    11
    Likes Received:
    0
    Location:
    Sacramento, CA
    Yeah, please do...I'm usually just a lurker around here, but this has really fascinated my fwb and I...she wants a spare 'me' around :big grin:
     
  21. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    hehehe

    This whole process puts a new light on those old jokes about the wife just keeping your dick in her purse.
     
  22. naughtie

    naughtie New Member

    Joined:
    Jan 21, 2005
    Messages:
    7,659
    Likes Received:
    0
    Location:
    U.S.A.
    I once had a dream that my SO had a detatchable (sp?) penis. I think it's my subconscious telling me I need to get him to do a mold for me.
     
  23. FairyTat

    FairyTat Anticipation, the taste of things to cum

    Joined:
    Sep 23, 2004
    Messages:
    609
    Likes Received:
    0
    Location:
    Nashville, TN
    I'm surprised no one has asked. What process did you use to keep your member at attention during the molding process? After all, if you're making a spare you for your s/o I'm assuming that she would prefer the maximum you.

    Inquiring minds want to know. :naughty:
     
  24. Smoked

    Smoked $5.50? Man fuck the avatar...how about you just sh

    Joined:
    Jan 27, 2005
    Messages:
    1,032
    Likes Received:
    0
    Location:
    Columbus, Ohio
    This is from the first thread.

    We haven't tried with the second batch yet.
    Just tested mixes using my finger for a reduced model.
     
  25. naughtie

    naughtie New Member

    Joined:
    Jan 21, 2005
    Messages:
    7,659
    Likes Received:
    0
    Location:
    U.S.A.
    Hey! Finger casting! That's a good idea, too! Even better: I will ask him to cast his FIST!!!!!!!
     

Share This Page