sealant and wax question

Discussion in 'That'll Buff Right Out' started by aznh2oman, May 9, 2006.

  1. aznh2oman

    aznh2oman OT Supporter

    Joined:
    Aug 11, 2004
    Messages:
    1,266
    Likes Received:
    0
    i have been searching multiple forums and have found conflicting answers. some pplz say its good some people say its redundant.

    the question is can you use sealant and then finish with wax? if so is there a waiting or curing time?

    more specifically PB EX-P followed with Natty's blue...


    thanks!
     
  2. n2_space

    n2_space Space > *.*

    Joined:
    Jan 14, 2002
    Messages:
    4,529
    Likes Received:
    0
    Location:
    Indy
    Yes, you can top a sealant with a wax, but wait 24 hours before doing so to let the sealant properly bond.
     
  3. paul9luap

    paul9luap Boiler Up

    Joined:
    Jun 28, 2003
    Messages:
    1,708
    Likes Received:
    0
    Location:
    SE Michigan
    :werd:
     
  4. exceldetail

    exceldetail New Member

    Joined:
    May 2, 2005
    Messages:
    174
    Likes Received:
    0
    Weather also plays a role. Hi humidity would necessitate a little further bonding time. Dry and warm requires a little less. I like to let the car "bake" in the sun for a while (after final wipedown) when using polymers.....
     

Share This Page