Scott quick question

Discussion in 'That'll Buff Right Out' started by Renegade, Sep 15, 2003.

  1. Renegade

    Renegade New Member

    Joined:
    Jun 30, 2003
    Messages:
    824
    Likes Received:
    0
    I was told by you to rub in the DACP and swirl free polish for a couple of minutes and then buff off when it looks clear.

    This is in one of your sticky's though.

    When using a polish or glaze, rub into the paint until it looks almost clear, and let sit for 20-30 minutes so the oils can soak in and it is easier to remove.


    Should I let the DACP and Swirl free polish sit in for 20-30 min b4 buffing?
    If I use a cheap orbital buffer with DACP or swirl free polish am i gonna just make more swirl marks?
     
  2. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,129
    Likes Received:
    757
    Location:
    Home of the Texas Rangers
    If you let DACP sit on the paint 20 minutes, it is going to be a PITA to remove. Swirl Free won't be so bad, but I remove both of those immediately.

    I was talking about products like Meguiars #7 or Hand Polish. One is called a glaze and the other a polish, but both are mostly polishing oils with very little cutting power. They seem to be easier to remove if you let them sit a while.
     

Share This Page