GUN Razardica and anyone with AR suppressor knowledge

Discussion in 'On Topic' started by Crossett, Sep 5, 2009.

  1. Crossett

    Crossett New Member

    Joined:
    Oct 21, 2003
    Messages:
    13,472
    Likes Received:
    0
    Location:
    In my mind
    Opinion about the Noveski switchblock?
     
  2. 993kgt

    993kgt building an airplane whee

    Joined:
    Nov 7, 2001
    Messages:
    13,061
    Likes Received:
    33
    Location:
    Destin, FL
    it's pointless unless you're running the m16 carrier group/buffer

    if you're running that, you'll benefit from less gas for certain situations
     
  3. Which buffer are you talking about? An M16 buffer would be a rifle style buffer setup. Are you talking about the CAR buffer?
     
  4. Razardica

    Razardica Active Member

    Joined:
    Sep 25, 2003
    Messages:
    47,092
    Likes Received:
    0
    Location:
    Phoenix, AZ
    hi

    Umm, it's cool, but precludes the use of some barrel length combinations/rails/etcetcetc

    I run a chrome silicon spring with an H2 buffer and an LMT Enhanced BCG (normal bolt though). You basically wanna run the heaviest buffer that the gun will still cycle reliably on. I have an LMT Mk18 upper so it has a pretty small gas hole.

    Perfect.

    I run suppressed 100% of the time though.
     
  5. Crossett

    Crossett New Member

    Joined:
    Oct 21, 2003
    Messages:
    13,472
    Likes Received:
    0
    Location:
    In my mind
    What's the difference between the standard and enhanced LMT BCG's
     
  6. LancerV

    LancerV Something Happened OT Supporter

    Joined:
    Sep 16, 2003
    Messages:
    49,903
    Likes Received:
    82
    Retimed cam slot
     
  7. Razardica

    Razardica Active Member

    Joined:
    Sep 25, 2003
    Messages:
    47,092
    Likes Received:
    0
    Location:
    Phoenix, AZ
    Enhanced BCG has more mass for a longer dwell time

    Of course, this all might not matter on your gun - I have a 10.5" barrel so my gas is especially violent and finicky
     
  8. LancerV

    LancerV Something Happened OT Supporter

    Joined:
    Sep 16, 2003
    Messages:
    49,903
    Likes Received:
    82
    Actually they redid the cam slot for a longer dwell time. If you look at your cam hole vsa regular one you will see its longer on the bottom
     
  9. LancerV

    LancerV Something Happened OT Supporter

    Joined:
    Sep 16, 2003
    Messages:
    49,903
    Likes Received:
    82
    Enhanced
    [​IMG]
    Regular
    [​IMG]
     
  10. ChipOnShoulder

    ChipOnShoulder New Member

    Joined:
    May 15, 2008
    Messages:
    1,612
    Likes Received:
    0
    Location:
    US
    I personally don't think it's worth it.

    One of my buddies got it on a 16" N4 barrel, and while it might theoretically improve reliability, i don't think most people shoot enough to see such a gain. Unfortunately, i didn't have the foresight to do a mag dump to see if my eyes wouldn't water when it was switched to the correct position, haha. Later when I went suppressed at a carbine class, I was choking/passing out when shooting in urban prone, since the gas buster shot the gas onto the grass and right back into my face.

    The main reason i don't think it's worth it is because of the price. $185 only gets you the clamp on model, you gotta really be lucky, and really pay to get the good switch block combos.
     

Share This Page