quick question about orange peel

Discussion in 'That'll Buff Right Out' started by MP, Apr 2, 2004.

  1. MP

    MP New Member

    Joined:
    Sep 10, 2002
    Messages:
    34,377
    Likes Received:
    0
    Location:
    Silicon Valley
    SO i've done some searching about it and i understand the problem and how it happens but I don't get how fixing it occours. If the problem is how the paint was applied and the solution is to wet sand / buff / polish etc the clear coat how does that fix the paint?

    Are you supposed to go all the way through the clear coat down to the paint to fix it? That would be lame seeing as how you won't have any clear coat left afterwards.

    :-\
     
  2. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,524
    Likes Received:
    865
    Location:
    Home of the Texas Rangers
    Go to www.meguiars.com and find the video section on wetsanding and buffing. That should answer most, if not all of your questions.
     
  3. flynfrog

    flynfrog Cool isnt Cheap

    Joined:
    Jul 16, 2001
    Messages:
    6,621
    Likes Received:
    6
    Location:
    Utah
    if the peel is in the base coat there isnt much you can do if its in the clear you can cut and buff but even then id be weary its super easy to og through clear
     
  4. a red heart

    a red heart Guest

    wetsanding and buffing an entire car SUCKS. i have done it and do not sugest it.
     

Share This Page