Projection Screen Help

Discussion in 'OT Technology' started by TexasStateGuy, Sep 23, 2004.

  1. TexasStateGuy

    TexasStateGuy New Member

    Joined:
    Mar 11, 2004
    Messages:
    28
    Likes Received:
    0
    Location:
    Texas
    What I have is a Panasonic ProScreen 2700 LCD projector hooked to an ATI Radeon 7000 graphics card in a Dell computer with Windows XP. My problem is that it seems like the screen size setting is too large to fit the projectors display area. Meaning I can't see the outer edges, such as the Start button, the tops and sides of the screen. It's almost like if you had a 19" monitor but you could only see 17" of it. I've downloaded the correct drivers for the card, but there's some setting I can't think of to correct the issue. Any ideas?
     
  2. Rob

    Rob OT Supporter

    Joined:
    Jul 6, 2002
    Messages:
    88,624
    Likes Received:
    40
    Location:
    Atlanta, GA
    Try changing the resolution that you are feeding to the projector.
     
  3. pookrat

    pookrat OT Supporter

    Joined:
    Dec 6, 2002
    Messages:
    1,113
    Likes Received:
    6
    Location:
    Houston
    Alot of projectors have Horizontal and Vertical Width settings. I know mine does. Might check the manual... :dunno:
     
  4. TexasStateGuy

    TexasStateGuy New Member

    Joined:
    Mar 11, 2004
    Messages:
    28
    Likes Received:
    0
    Location:
    Texas
    I changed the resolution setting-that fixed it. Thanks.
     

Share This Page