Post your car specs

Discussion in 'OT Driven' started by admin_who_hates_users, Mar 8, 2005.

  1. 91 mustang 5oh, looks bone stock from the outside

    borred 306,solid motor mounts, hardened forged crank, Dss pistons stroked to a 351, afr 185 heads/w titanium valves and springs, Custom lunati cam ,holley upper intake,80mmtbody,(motor can pull 8 grand) 24lb injectors, msd ignition/blaster coil, tremec tranny, 4.10 assend eaton posi.

    My only drawback right now is that i have a baby seat in the back of mine lol. I made a promise to my wife to never even hit the gas hard with my daughter in the car. lol she loves ridding in the back of it because i got solid motor mounts,When im idling, the car rocks back and forth.Whenever i rev the motor up, she gives me a thumbs up and blows bubbles, shes almost 2. And then when shes not in the car, this thing is a cold blooded import killer. I hate imports with a passion. Almost every one has somebody else slap a turbo on it and a shitcan exhaust pipe and they think there a bad ass.They sound stupid too.

    I built the whole motor, only part i needed help with was degreeing the cam and gettin the springs on the heads
     
  2. IslanderOffRoad

    IslanderOffRoad Do you even lift kit? OT Supporter

    Joined:
    Dec 23, 2003
    Messages:
    73,559
    Likes Received:
    239
    Location:
    Houston, Tx
    03 Mustang GT. Coupe, 4.6L SOHC Automatic

    Suspension: Maximum Motorsports Camber Caster Plates, Strange Engineering 10 Way Adjustable Shocks and Struts, Eibach Pro Kit Springs, Energy Suspension Bushings. Currently riding on Nitto NT-555 tires

    Exhaust: SLP Loudmouth Catback, and SLP Catted X-Pipe

    Engine: Diablosport Predator, BBK 70mm TB, BBK CAI.

    Ran a 14.5 before the exhaust and suspension, I'm hoping for much better now.
     
  3. God of Thunder

    God of Thunder New Member

    Joined:
    Dec 6, 2004
    Messages:
    4,290
    Likes Received:
    0
    Location:
    Asgard
    2001 Lamborghini Diablo (see "your ride pics" for pictures of car")
    2001 Mustang GT-Roush Stage 3 Fascia, Flowmaster weldins, K&N.
     
  4. dednyori's

    dednyori's Brunettes FTMFW!

    Joined:
    Oct 16, 2003
    Messages:
    2,252
    Likes Received:
    0
    Location:
    Don't worry! I'll be leaving soon..
    '81 Camaro
    355
    Victor Jr. 23° aluminum heads
    roller cam
    11:1 pistons
    TH350/3500 stall
    4.10s

    Best of 7.99 @ 91 in the 1/8th. 1.80 60'
     
  5. Built 406" w/ about 450 hp 450 lb ft matched to a 4L60E


    About 300 body mods and 30,000 of work
     
  6. matrix243

    matrix243 My body, is ready.

    Joined:
    May 15, 2001
    Messages:
    18,863
    Likes Received:
    38
    Location:
    Calgary
    Farmer Johns 71 F-100.
    -390ci
    -400hp
    -4.10's
    -3000rpm stall
     
  7. matrix243

    matrix243 My body, is ready.

    Joined:
    May 15, 2001
    Messages:
    18,863
    Likes Received:
    38
    Location:
    Calgary
    ...and not a car.
     
  8. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    87 Mustang GT
    5spd Ttops
    60k orig miles

    March Underdrive pullies, Mass Air conversion, Cobra upper and lower intake, Cervinis functional ram air hood, BBK shorty headers, MAC off road h-pipe, Flowmaster mufflers, Kenny Brown subframes, Pony wheels, Steeda Tri-Ax shifter, 3:73 gears, Fluidyne 3 row Aluminum Radiator, 80mm MAF meter,180 degree thermostat, Trick Flow Aluminum Heads, 70mm Throttle body and EGR spacer,255lph Fuel pump, Ultradyne Stage 2 cam,30# injectors, MSD Blaster coil, 9mm FMS plug wires, Aluminum driveshaft, MSD digital 6 ignition, Tremec TKO tranny, Spec stage2 Clutch, Lakewood bellhousing, battery relication, F-Body electric fans.....
     

Share This Page