Pc 7424...

Discussion in 'That'll Buff Right Out' started by CBlakeNS, Feb 22, 2006.

  1. CBlakeNS

    CBlakeNS New Member

    Joined:
    Jan 15, 2006
    Messages:
    326
    Likes Received:
    0
    Just purchased this PC - http://www.autogeek.net/hk7424.html

    Im going to do my car this weekend, and I have that new line of mothers power products....

    Im going to wash, clay, wash, apply the mothers power polish via pc at speed of 5/6 and then once I get that done apply the power wax via pc at about 1-2 speed...

    How does that sound any other opinions?
     
  2. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,136
    Likes Received:
    758
    Location:
    Home of the Texas Rangers
    No way to know what level of polishing your car needs without seeing it in person.

    5-6 for polishing
    3 for LSPs

    Work small areas via PC, 2' x 2' and you need to use enough pressure to bog the PC, then let up just enough of the speed to pic back up and use that pressure. Once the product is spread out over the area you are working, slow down to about 1" per second with 50% overlapping passes, normally takes 3-4 slow passes to completely break the product down.

    Move the PC too fast over the surface, or no pressure and lots of luck trying to remove swirls.
     
  3. CBlakeNS

    CBlakeNS New Member

    Joined:
    Jan 15, 2006
    Messages:
    326
    Likes Received:
    0
    Thanks Scott for the reply, im going to try to get my vehicle done this weekend if the weather works out for me. Ill definately have pictures.
     

Share This Page