Paint advice needed!!

Discussion in 'That'll Buff Right Out' started by Original, Jul 2, 2008.

  1. Original

    Original OT Supporter

    Joined:
    Jun 21, 2004
    Messages:
    33,806
    Likes Received:
    15
    Location:
    God's Country
    Alright so the past week i've been repainted parts of my car.. all the parts that can be removed turned out like a factory finish, but my doors are giving me endless shit.

    I only needed to repaint a line that went down the middle of both doors.. so i masked off most of the door and prepped and sprayed as usual.

    now when i wet sand the clear, the overspray flakes/peels off around the edges every time and clogs the sandpaper. I have a feeling if I sand enough it'll flake down to the base coat :dunno:

    point of no return? i let the clear cure, don't know why it's peeling off like dead skin :wtc:

    cliffs: clear overspray is peeling and every time i wet sand it just clogs the paper. 800/1500/2000 grit, doesn't matter.
     
  2. Original

    Original OT Supporter

    Joined:
    Jun 21, 2004
    Messages:
    33,806
    Likes Received:
    15
    Location:
    God's Country
    lost my patience, it goes in the shop tomorrow at 8 :o

    it needs a respray, lock it up :rolleyes:
     

Share This Page