Okay so i was thinking

Discussion in 'That'll Buff Right Out' started by Renegade, Aug 24, 2003.

  1. Renegade

    Renegade New Member

    Joined:
    Jun 30, 2003
    Messages:
    824
    Likes Received:
    0
    should I use meguiars show car glaze #7 if im gonna do DACP, swirl free polish, S100 SEC, S100 paste wax. Stick it possibly in between the s100 SEC and s100 paste wax. Also can DACP and swirl free polish be applied by hand.
     
  2. Buck-O

    Buck-O Guest

    Ive had problems with #7 bonding to the S100 SEPC, it gets a bit streaky, and looks really bad when you put wax on it.

    But give it a try and see if it works any better for you.
     
  3. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,352
    Likes Received:
    823
    Location:
    Home of the Texas Rangers
    You can use #7 as your final glaze before waxing. Like Buck-O said though, it tends to smear, so you really need to go over the car a few times with a microfiber towel.

    You can use DACP and SFP by hand, it has been addresses numerous times in this forum.
     
  4. Jackhole

    Jackhole New Member

    Joined:
    Dec 23, 2001
    Messages:
    69,137
    Likes Received:
    0
    Location:
    Fort Lauderdale, FL
    Why not just use one or the other, they're compatible products.
     
  5. Buck-O

    Buck-O Guest

    :werd:

    I usually just use the S100 SEPC, i find you get a bit of a better shine with the SR2.0 and the #7, but the S100 just goes on and off SOOOO nice, that i find it hard to come up with an excuse to go through the trouble of #7 and SR2.0
     

Share This Page