Discussion in 'That'll Buff Right Out' started by iansane, Sep 5, 2007.
The new c6 competition grey wheels.
And the c6 Z06 brakes. (6pot w/ 14" rotor)
oh and , lurker
such an ugnly car.
but each to his own.
I like it
Not bad, two things to fix tho... that front skirt and add a LS1
I'm not gonna lie, the brakes/wheels/tires are hot. Any noticable brake bias with those on the front?
Well the rears aren't stock either. With an adjustable prop valve things don't seem too bad. I'm think about mounting my old brakes that were on the front, on the rear. '02 Z06 brakes.
Sweet. Someone thinks my car is ugly.
I havent bothered to look yet but what all is envolved with the c6 z06 brakes? Are there kits for different kits for different gens? I'd love to do it to my car. Although you probably need 18's to clear them huh?
I've never researched kits or anything but I know there are a few companies/guys that are doing setups and stuff for at least the 4thgen and 3rdgen platform. I would almost guarantee a following for the first gen. The c6 zo6 stuff will bolt to any c5 setup so if there are brackets for that, just get calipers from www.gmpartsdirect.com. That's what I did. I used to run c5 stuff. What kinda car do you have? Yeah, at least 18's and some 18's don't have spoke clearance because there calipers are WIDE.
no not just yours, all trans ams/fbodies/whatever they are called
yeah but the interior is sex
2000 camaro ss
Just a quick check and I found some at
as well as
You'll still have to check spoke clearance. What wheels do you have? You'll have to get a measurment from the inside of your spoke to the hub mounting surface.