My system isn't working. PLEASE READ =(

Discussion in 'OT Technology' started by TechMo, Mar 12, 2005.

  1. TechMo

    TechMo New Member

    Joined:
    Feb 17, 2004
    Messages:
    1,477
    Likes Received:
    0
    Location:
    Miami FL
    Well yesterday coming home from a friends house. I had my system bumpin. Well after about 30 mins of having it on, I smelled like something was burning. I quickly turn off my subs threw the radio. Well I left it that way until this morning when I turned it on and it didn't work. I checked the fuses on the amp. Everything seems to be ok. I'm thinking the amp fried. HELP PLEASE! :x:
     
  2. veonake

    veonake OnT poster, OT lurker

    Joined:
    Apr 11, 2004
    Messages:
    4,235
    Likes Received:
    0
    Location:
    NYC
    If all your fuses are still good, check to see if your amp has its own built-in fuse. Take a multimeter back to your amp and with your car in the accessory position, check to see if you have voltage at the main power wire at the amp. Then, making sure your radio is on, check the remote +12V turn on lead for voltage. If both of these are working and your amp is not turning on, then it is probably a goner.
     
  3. JRock10

    JRock10 Active Member

    Joined:
    May 25, 2005
    Messages:
    7,751
    Likes Received:
    0
    Location:
    Nashville, TN FTW
    might be blown subs. does the amp power up then go into protect? do your subs still move freely?
     

Share This Page