my q6600 overclock *screenshots*

Discussion in 'OT Technology' started by thebox, Dec 29, 2007.

  1. thebox

    thebox New Member

    Joined:
    Feb 22, 2005
    Messages:
    45,695
    Likes Received:
    0
    Location:
    Seattle
    nothing special, just thought i'd share.

    q6600 @ 3.33ghz 1.365v
    zalman 9700NT cpu cooler (temps peak at 62c in prime95)
    asus p5w dh deluxe motherboard
    g.skill ddr2-800 RAM running at 740mhz
    bfg 8800gts 320mb stock OC
    silverstone 560w zeus PSU (loud motherfucker)
    silverstone TJ09 case :)bowdown:)
    2x160 seagate HDD in RAID 0
    2x250gb WD storage
    1x750gb WD storage

    fucking 5.8 in RAM :mad: :mad: :mad: vista's benchmark is such a piece of shit.
    [​IMG]
    [​IMG]
     
  2. dakayus

    dakayus New Member

    Joined:
    Dec 19, 2007
    Messages:
    54
    Likes Received:
    0
    62 is pretty high for 1.36 volts. Longevity goes with temperature so perhaps invest in a good heatsink. The best is thermalright extreme 120 which does need to be lapped (flattened). If you have the 9700 then either your heatsink might be defective, too much or not enough thermal paste, or your case cools really poorly. If you live in the desert, then forget what I'm saying lol.
     
  3. Doomsday

    Doomsday XXX

    Joined:
    Mar 14, 2000
    Messages:
    14,902
    Likes Received:
    0
    Location:
    Minnesota
    my 3.6ghz is only a second lower
    [​IMG]
     
  4. thebox

    thebox New Member

    Joined:
    Feb 22, 2005
    Messages:
    45,695
    Likes Received:
    0
    Location:
    Seattle
    :werd: but i'm not too worried about it. the thermalright is pretty :cool: though :wiggle:

    cooling is most definitely not the case's problem. the tj09 is about as good as you can possibly get.
     

Share This Page