my budget system

Discussion in 'OT Technology' started by Mega-JC: Da Return, Apr 24, 2007.

  1. Mega-JC: Da Return

    Mega-JC: Da Return Tiger Knee!

    Joined:
    Sep 7, 2001
    Messages:
    15,105
    Likes Received:
    3
    Location:
    Tacoma, Wa
  2. Mega-JC: Da Return

    Mega-JC: Da Return Tiger Knee!

    Joined:
    Sep 7, 2001
    Messages:
    15,105
    Likes Received:
    3
    Location:
    Tacoma, Wa
    any input would be helpful :o also what kind of ampkit should I get?
     
  3. DjShiznit

    DjShiznit Representing Deutschland, yah.

    Joined:
    Oct 8, 2001
    Messages:
    3,963
    Likes Received:
    1
    Location:
    PNW
    I run a similar setup in my Toyota truck. 4ch amp powering 2 seperates in stereo, and rear channel on amp bridged powering a 10" MTX sub. It gets the job done just fine. As far as an amp kit... I'd personally run a 4 guage power wire. It may not necessarially be needed at the moment, but if you decide to run another amp in the future, or a larger amp, you'd be prepared and not need to rip out 8guage power to replace with 4guage. The cost difference shouldn't be too much. That's just my $0.02.
     

Share This Page