GUN more info on teh 4th Gen GLOCK (new recoil rod assembly)

Discussion in 'On Topic' started by Ebtromba, Dec 19, 2009.

  1. Ebtromba

    Ebtromba Active Member

    Joined:
    Nov 22, 2005
    Messages:
    6,050
    Likes Received:
    0
    Location:
    alexandria, VA
    http://glocktalk.com/forums/showthread.php?t=1153272

    Just returned from the annual SWAT Round-Up in Orlando for the day. Glock was setup and had Dave Sevigny, Jesse Abbate, and Randi Rogers showing off the new 4th generation Glock. Asked Jesse if I could take a photo...she went and asked and was told NO!

    The frame has a newer RTF pattern...not as many spikes/sharp as the current RTF. You get two additional back-straps with the pistol...without any back-straps installed you get what Jesse was calling the SF frame. Clip on the Medium back-strap and you have your standard tried and true Glock frame. Install the Large and you get the frame of the G20/G21 pistols. I was not very impressed with how the straps attach...looks like they would pop off really easy, but who knows.

    Also new is a reversible magazine catch/release. Setup for right hand shooters you can use all the old magazines. Lefties will only be able to use new mags that will have double cut outs for the catch. I thought the new mag release looked hideous. Very large.

    New as well is a double spring recoil guide rod assemble. Looks like a stretched out version of the G26/G27 recoil assemblies. Jesse claimed it reduces recoil. [ :ugh::ugh::ugh: ]
     
  2. Ebtromba

    Ebtromba Active Member

    Joined:
    Nov 22, 2005
    Messages:
    6,050
    Likes Received:
    0
    Location:
    alexandria, VA
    http://glocktalk.com/forums/showpost.php?p=14280388&postcount=109

    I handled and shot the same Fourth Gen pistol that eringobragh did

    Let me first say that eringobragh has no reason to lie and I'll tell ya that I know him and know he is as big a Glock Fag . . . ok, Glock FAN as there is out there. He isn't trying to run Glock down.

    He is correct about almost all of his impressions





    The Fourth Gen Glocks will be introduced in a matter of weeks to the public . . . at SHOT Show.

    As to this being a Proto and not being a final production pistol, you could be right, but not from what the Reps were saysing and not from what I saw.

    This was not a Rapid Prototyped mock up. This was a working, shooting, handling pistol and it is not the only one. I shot it and watched while a line of folks handled/shot it.

    Could things change? Sure, but I'd be very surprised if it is changed in the next five weeks.

    In my opinion, I hope they change a few things based on feedback and "fix" it before it goes into full production, but based on Glocks history, I doubt it. It looks set in stone to me.

    There are four main changes with the 4th gen and one minor one I saw, but don't know what it is for.

    1) The magazine release. As has been described, it is now a reversible release. I asked about the previous "ambi" release and the change to all the magazines over the last couple of years and was told that the Ambi release has been shown to have been a mistake and is now a dead issue.

    The "pad" of the new reversible release is larger in surface area.

    The magazines for the new "Rev Release" has cuts on both sides of the magazine and are mirror images of each other. You can use all the old magazines if you keep the release on the left side of the pistol, but if you reverse it, you need the as yet to be released double release cut magazines. The new pistols will of course have the double cut magazines. No word if all new magazines will have the cuts, but based on Glocks history, I wold say with confidence that I expect that.

    2) The 4th generation pistols will have a double spring recoil assembly, as described by eringobragh, it is a longer version of the G26/G27 spring.

    It will not be designed to retrofit the older generations of pistols. The ring in the front of the slide is a larger diameter to accommodate the new assembly.

    I've actually been asking for this for years. The double spring system works amazingly well and in actually shooting the 4th Gen G22 they had on hand, I can tell you that is sucks up a lot of the "bite" of the .40S&W transferred to the shooter via the grip. It felt kinda like shooting "+P" in a G17, maybe a little snapper, but not much.

    If there is a 4th Generation G18C . . . look the hell out :big grin:

    3) The RTF texture on the 4th Gen pistol I examined is like a 1/2 texture RTF. As I like to carry IWB, I don't think this is really for me.

    4) The main change of the 4th Gen is the interchangeable back straps.

    As this is a Glock Forum, it should be a pretty easy thing for folks to wrap their head around. All 4th gen will be "SF". Meaning that the distance between the face of the trigger and the back strap is shorter. They do this by "under cutting" the back strap.

    There will be two additional "add-a-straps" for the smaller framed pistols. I did not ask about the larger frames, but I ASSUME there will be one.

    If you carry the pistol with no add-on, you have an "SF", small grip.

    Add the smaller one, you have the traditional G17/G22/ect feel. Add the larger and you make you 9mm/40/357 feel like a G21

    Where eringobragh got it wrong is that it's not just a whimpy snap on addition. The pistol will come with the two additional back straps and a longer back pin. To add a backstrap, you push out the rear pin, add the strap, which locks at the bottom and add the longer pin to hold the strap in place.

    Personally, as an "SF", I didn't feel any difference (and I have smaller hands. They are very "Manly", just smaller then average :big grin:), but you could feel a change adding the smaller add-a-strap. Not a big change and not worth the change, in my humble opion

    The 4th Gen pistol looks pretty much identical to the 3rd Gen. One give-a-way is that the rear pin holes in the frame are larger and countersunk half moons.

    The small change is on the inside. Pulling the slide off there is an as yet unexplained change in the frame. At the rear, on the left there is a hole in the frame. It's vertical and I doubt it's for "weight savings". Just so we know I know what a Glock frame looks like, I've been a Glock Armorer since the late 80's, have been through the "Advanced Armorer" and work on Glocks pretty much daily

    the 4th Generation, I was told, is an OPTION. They will continue to offer the 3rd Gen pistols and you can have the 4th Gen if you like. Probably the best feature so far


    In five or six weeks you'll be able to get all this directly from Glock and the Gun Press. Until then, feel free to consider it Internet Rumor.
     
  3. Crossett

    Crossett New Member

    Joined:
    Oct 21, 2003
    Messages:
    13,472
    Likes Received:
    0
    Location:
    In my mind
  4. phrozenlikwid

    phrozenlikwid New Member

    Joined:
    Jul 13, 2007
    Messages:
    5,709
    Likes Received:
    0
    Location:
    NKY
    Interesting the direction they are taking...... can't say it's what I would have figured.
     
  5. Ebtromba

    Ebtromba Active Member

    Joined:
    Nov 22, 2005
    Messages:
    6,050
    Likes Received:
    0
    Location:
    alexandria, VA
  6. LancerV

    LancerV Something Happened OT Supporter

    Joined:
    Sep 16, 2003
    Messages:
    49,827
    Likes Received:
    70
    Hate double springs
     
  7. Keesh

    Keesh New Member

    Joined:
    Oct 26, 2003
    Messages:
    15,333
    Likes Received:
    0
    Interested in trying it. Grip shape doesn't matter too much to me so I could do without the adjustable back strap, but I'm interested in trying the new frame texture.
     
  8. Rip The Jacker

    Rip The Jacker New Member

    Joined:
    Jul 24, 2002
    Messages:
    53,993
    Likes Received:
    0
    Anyone ever try a CCF race frame? The 1911 backstrap looks interesting.
     

Share This Page