Alright. Time for the mg34 to go. Here's the deal: I haven't ever shot the gun. I welded it together using my jig which I have for rent. The jig accounts for all dimensions except one. I forgot about this when I welded the receiver, so the barrel shroud is slightly too far forward, not allowing the gun to fire. Easily fixed with a reweld, I just don't have the time right now to do that and I would like to work on some other projects. The kit has a broken grip panel, easily replaced just never got around to it. The receiver has the sear slot welded up so you will not have to do that. The receiver is going to come in 3 pieces for you to weld back together. No messing with overlapping pieces, fitting in pieces, etc. I will NOT sell the receiver as an entire piece unless you are in Colorado, so don't ask. The kit has all the semi auto parts that you will need along with an updated disconnector. Mg34 Kit with good barrel Semi Bolt Semi FCG Extra MIRROR Barrel Carry Handle If you purchase the kit, you can borrow the jig for free. I would like to get $1700+shipping obo I will split up the kit IF there is a buyer for everything. All you need to do is weld this kit together which is a fairly easy task.