Klasse AIO and Werkstatts Acrylic Jett

Discussion in 'That'll Buff Right Out' started by chojin, Apr 11, 2006.

  1. chojin

    chojin You must defeat Sheng Long to stand a chance

    Joined:
    Jun 14, 2001
    Messages:
    2,109
    Likes Received:
    0
    Location:
    OC/SGV
    Do they bond well? I'm restocking on some products and I'm thinking about doing this process:

    Clay Magic Clay Bar
    Klasse AIO
    Werkstatt AJ
    S100
    Optimum Car Wax every now and then between waxes

    Is this a good idea? Maybe switch Poorboy's EX-P with AJ? I have a silver car btw.
     
  2. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,304
    Likes Received:
    809
    Location:
    Home of the Texas Rangers
    AIO works fine with AJ, although I'd replace AIO with Prime when you run out of Klasse.

    EX-P is fine as well, I think AJ has the edge in appearance though.

    Instead of topping AJ, just add a second layer and see how you like it.
     
  3. chojin

    chojin You must defeat Sheng Long to stand a chance

    Joined:
    Jun 14, 2001
    Messages:
    2,109
    Likes Received:
    0
    Location:
    OC/SGV
    :cool: Thanks Scott. How often should I layer AJ?

    I've been out of the loop so long...it seems like everyone and their mothers have a PC. Does anyone apply stuff by hand anymore?
     
  4. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,304
    Likes Received:
    809
    Location:
    Home of the Texas Rangers
    I'd go with two coats of AJ, one right after the other. Wait 12 hours to top with a carnauba if you want but you probably won't once you see how it looks.

    I do all my polishing via PC, all waxes and sealants by hand except for Meguiars NXT and Clearkote's Carnauba Moose Wax.
     

Share This Page