in dash tv install question about how to run video while car is moving.

Discussion in 'OT Technology' started by thomor25, Sep 2, 2004.

  1. thomor25

    thomor25 I make money online....

    Joined:
    Jun 11, 2000
    Messages:
    11,101
    Likes Received:
    0
    Location:
    Denver Colorado
    I got a pyle in dash unit, its the pltv64r and i heard about having to use the brake or something like that to watch video on the screen and it won't let you watch it while the car is moving. How do you get around this? I want to be able to play movies and tv while the car is moving. There is 2 wires coming out of the brain and there is heatshrink insulation on the ends of it. In the manual it says tv control. it looks liek the ends of the wire are stripped and the heat shrink tubing is hold the wires together to make contact. Here is the link to the product http://www.pyleaudio.com/itemdetail.asp?brand=pyle&cat1=Mobile%20Video&cat2=In-Dash%20Monitors&model=PLTV64R and here is the pdf manual http://209.125.209.59/PDF/PLTV64R.pdf the manual represents what my unit looks like the pic in the product page is eithe ra different model or a new model year then mine.
     
  2. soll

    soll New Member

    Joined:
    Sep 1, 2004
    Messages:
    16
    Likes Received:
    0
    if the instructions say to hook up a (what ever color it is) wire to the e-brake, take that wire and hook it up to the ground wire, the ground wire should be black. Hope that helps you.
     
  3. thomor25

    thomor25 I make money online....

    Joined:
    Jun 11, 2000
    Messages:
    11,101
    Likes Received:
    0
    Location:
    Denver Colorado
    i found out tonight when i installed it. when the wires are touching you can run video when they aren't video goes off. I left them twisted.
     

Share This Page