I need an amp(newb)

Discussion in 'OT Technology' started by Undertow, Oct 11, 2002.

  1. Undertow

    Undertow Guest

    To power 2 Rockfort Fosgate HE 10's. I'm looking to spend around $300 or less depending on what your guys opinions on what I need. I don't know squat when it comes to this so any help would be appreciated.
     
  2. Axilrod

    Axilrod Guest

    Step 1- Sell Subs
    Step 2- Buy some subs that are worth a shit
    Step 3- Come back and ask the question.

    No seriously, go on ebay, and if you want to stay all fosgate you will definitely be able to find something to power those subs to their limits and still have money left over.
     
  3. 04

    04 Guest

    How about a Lanzar vibe 1200d?
     
  4. Axilrod

    Axilrod Guest

    Re: Re: I need an amp(newb)

    Woah, good choice, but thats way too much for those fosgates, they only need 400 watts RMS between them.
     
  5. 04

    04 Guest

    Re: Re: Re: I need an amp(newb)

    Well, he didnt specify box size, or even the type of music he listens to. I would assume they are 4ohm loudspeakers so when wired in paralllel he would get a 2ohm load. The amplifier is supposed to put out 800w constant into 2ohms, or 400w per driver, that sounds fine to me.
     
  6. Axilrod

    Axilrod Guest

    No I meant those subs are 200 watts RMS each, they only need 400 watts between them.
     
  7. 04

    04 Guest

    :confused:

    Straight off the Rockford website: "Power handling(RMS) - 400 Watts

    Power handling(Peak) - 800 Watts

    Impedance - 4 Ohms
    "

    Am I missing something?
     
  8. Axilrod

    Axilrod Guest

    YES, he said HE not HE2, you have the specs for the HE2, not the HE.

    Straight off Fosgates Web Site

    10 inch
    Type Woofer
    Voice coil Configuration - Single
    Material - Aluminum
    Description -
    2.5 4-Layer
    Cone Material Paper -
    FIBERlock
    Frame Material Frame - Stamped
    Material - Steel
    Surround Material Foam
    Description -
    BART
    Spider
    Crossover
    Specifications Power handling(RMS) - 200 Watts
    Power handling(Peak) - 400 Watts
    Impedance - 8 Ohms
    Sensitivity - 85.7 db
    Vas - .507
    Fs - 34
    Qts - .507
    Xmax - .51
    Dimensions Depth Bottom mount - 5.375 in.
    Cutout - 9.3125 in.
    Displacement - 103.68 cu in.
    Enclosure Sealed box -
    Recommended Minimum Volume (Cubic Feet) - .625
    Recommended Maximum Volume (Cubic Feet) - 1.5
    Ported box -

    Recommended Volume (Cubic feet) - 1.0

    F3(Hz) - 35

    Number of Ports - 1

    Port diameter(Inches) - 3

    Port Length(Inches) - 13.25
     
  9. 04

    04 Guest

    :doh:

    sorry, I did not know there was an HE2
     
  10. Undertow

    Undertow Guest

    So I still don't know which amp to get. :(
     
  11. Axilrod

    Axilrod Guest

    JBL600.1 will be fine.
     

Share This Page