GUN I nearly broke my wrist today trying to remove my AK stock

Discussion in 'On Topic' started by thegooch, Aug 5, 2008.

  1. thegooch

    thegooch OT Supporter

    Joined:
    Jan 5, 2008
    Messages:
    15,573
    Likes Received:
    40
    Followed these instructions

    http://www.ultimak.com/AKStockR&R.htm

    Got the gas tube wood off. The little tab for the lower stock wouldn't fucking move so I tried to remove the buttstock.

    I put a flat head screwdriver and tried prying the stock, fucking thing wouldn't move. I tried prying so hard that I litteraly broke the fucking screwdriver in two, my wrist slammed into the trigger assembly and put a 1/2" gash in my wrist and it's all fucking swollen.
     
  2. yar1182

    yar1182 New Member

    Joined:
    Mar 26, 2008
    Messages:
    4,852
    Likes Received:
    0
    Location:
    Ventura California
    I assume you removed the big wood screw. Sounds like the wood of the slock expanded. I would of chucked the stock up in a vice (rifle upside down) and taped the pistol grip with a rubber mallet. A few good wacks and the stock should start to seperate from the reciever.
     
  3. thegooch

    thegooch OT Supporter

    Joined:
    Jan 5, 2008
    Messages:
    15,573
    Likes Received:
    40

    Oh yeah all screws removed, fucker wouldn't move. I tried hitting it with hammer, removing pistol grip etc.
     
  4. GlobeGuy

    GlobeGuy New Member

    Joined:
    Jun 14, 2004
    Messages:
    2,974
    Likes Received:
    0
    That sucks.. :hs:
    My AK stock came off easy, thankfully.
     
  5. xpinchx

    xpinchx hes got a nice cock, on the thin side but its stil

    Joined:
    Dec 18, 2003
    Messages:
    46,800
    Likes Received:
    0
    Location:
    East Lansing, MI
    Mine came off pretty easy but it was a dragonuv-style stock. Had to sand off like 1/8" from the romanian wood I bought to get it to fit in there. :sad2:
     

Share This Page