How much/difficult to convert auto to stick?

Discussion in 'OT Driven' started by zyg0te, Oct 15, 2003.

  1. zyg0te

    zyg0te I've made a huge mistake.

    Joined:
    Oct 2, 2003
    Messages:
    2,995
    Likes Received:
    0
    Location:
    norcal
    How I know it will take a lot of work, but how much would I be looking at for everything?

    The car is a 93 240sx btw
     
  2. Mr Bridge

    Mr Bridge New Member

    Joined:
    Sep 18, 2003
    Messages:
    3,094
    Likes Received:
    0
    Location:
    San Diego, CA
    Well if you take it somewhere to get done it will most likely run you about 1200-1700 depending on where you go.
     
  3. GVR4

    GVR4 Guest

    generally it is cheaper to buy the same car in a 5spd than to pay for a conversion.
     
  4. Marmot

    Marmot Guest

    Damn, I knew this was a 240sx before even clicking. Is it a convertible?
    Anyways, for an S13, it costs under a grand if you do it your self. I mean, what's so hard?
    $300 for a used tranny.
    Slave cylinder, master cylinder, and extra brake pedal or clutch pedal, some fluid, a dremel, maybe an ecu, flywheel, and clutch kit. Plus the lines....
     
  5. zyg0te

    zyg0te I've made a huge mistake.

    Joined:
    Oct 2, 2003
    Messages:
    2,995
    Likes Received:
    0
    Location:
    norcal
    no, its not a convertible.
     
  6. ejmack

    ejmack Guest

    easy... very easy
     

Share This Page