GUN heavy barrels for 10/22 that maintain iron sights?

Discussion in 'On Topic' started by eWRXshun, Oct 17, 2006.

  1. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
    i'm looking at getting a 10/22 as a gun to mildly mod but i'd like to not have it scoped and just stick with some upgraded irons.

    what full length heavy barrels maintain the factory iron sights?

    when i say full length i mean same diameter the whole way down, not like the factory barrel with starts off thick at the chamber but tapers down towards the muzzle.
     
  2. TwoGuns

    TwoGuns Medical Crew

    Joined:
    May 3, 2001
    Messages:
    8,756
    Likes Received:
    0
    Location:
    Pasadena, CA/Northern AZ
    Can't say I've seen a .922 barrel that has iron sights, I actually wanted to do the same thing awhile back and looked into it, but didn't find anything.
     
  3. Gimik

    Gimik New Member

    Joined:
    Sep 16, 2003
    Messages:
    36,559
    Likes Received:
    0
    Location:
    Feenicks, Az
    I thought I saw a few with a fiber front sight. I'm at work though, so most weapon stuff is blocked.
     
  4. grizzy

    grizzy OT Supporter

    Joined:
    Sep 12, 2004
    Messages:
    928
    Likes Received:
    0
    Location:
    Cinci, OH
  5. Paul Revere

    Paul Revere OT Supporter

    Joined:
    May 19, 2003
    Messages:
    38,936
    Likes Received:
    177
    Location:
    Cali-NO NFA-fornia
    i might consider this :eek3:
     
  6. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
  7. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
  8. Fire Sauce

    Fire Sauce New Member

    Joined:
    Dec 21, 2003
    Messages:
    27,465
    Likes Received:
    0
    Location:
    Hilton Head Island, SC
    Be hardcore and machine them yourself. :eek5:
     
  9. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
    i would if i had the equipment to do so. a dremel and a hand file isn't exactly the most precise way to go about that sort of thing.
     
  10. Fire Sauce

    Fire Sauce New Member

    Joined:
    Dec 21, 2003
    Messages:
    27,465
    Likes Received:
    0
    Location:
    Hilton Head Island, SC
    :greddy: Pussy.
     
  11. lobstradomus

    lobstradomus New Member

    Joined:
    Jan 5, 2004
    Messages:
    6,291
    Likes Received:
    0
    Location:
    CA
    You could try something like this: http://www.tech-sights.com/index.html has the rear sight on the receiver like you want and as a plus you can use any dovetail front sight you want and any .920 barrel.
     
  12. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
    that's what i was going to do, just not with that site. someone on here made a thread about irons on a 10/22 and someone posted a setup like the rear sight on an 870 police model.

    the links grizzly posted didn't seem to have the notch in the front of the barrel for a front site like the following pic:
    [​IMG]
    it looks like it just has the notch for the rear flip up site that comes from the factory.
     
  13. soccaian

    soccaian New Member

    Joined:
    Oct 6, 2003
    Messages:
    28,859
    Likes Received:
    0
    i know its what you want... but why would you want a heavy 10/22 that just has iron sights?
     
  14. eWRXshun

    eWRXshun hai

    Joined:
    Sep 22, 2003
    Messages:
    16,666
    Likes Received:
    0
    Location:
    LSU
    i want to put it in a hogue overmold stock. i like the way the thicker barrels look in them :rofl:

    purely cosmetics.
     

Share This Page