Find me 2 Subs for this Amp

Discussion in 'OT Technology' started by Jay487, Apr 26, 2006.

  1. Jay487

    Jay487 What's Life If You Ain't Enjoyin' It?

    Joined:
    Dec 11, 2001
    Messages:
    4,126
    Likes Received:
    0
    Location:
    Syracuse, NY
    Audiobahn A8000T 800W Mono Intake Series Amp

    Brand New Audiobahn A8000T Mono Amp
    Class A/B MOSFET Power Supply
    1x1600 Watts Max Power
    2 Ohm Stable Mono
    Non-Requlated Power Supply
    Full MOSFET Circuitry
    Double Sided Circuit Board
    Air Induction Fan Cooled
    RCA (Low Level) & Speaker (Hi Level) Inputs
    RCA Outputs
    Phase Shift Switch : 0° to 180°
    Variable Low Pass Crossover : 50Hz to 120Hz
    Variable Subsonic Filter : 20Hz to 50Hz
    Signal To Noise Ratio : > 100dB
    18dB Bass Boost
    T.H.D. : 0.02%
    1 Channel Operation
    Soft Start Circuitry
    30A x 2 Fuses
    Dimensions : 11-1/16"W x 1-1/7"H x 11-7/8"D
    White Cloth Handling Gloves
    Audiobahn Window Sticker
    Frequency Response : 10Hz - 40KHz (+/- 1dB)
    3-way Protection Circuitry: Thermal, Short Circuit and Overload; Cooling Fan
    Cobalt Blue Illumination
    High gloss Chrome Plated Finish
    Nickel Plated Block Terminals
    Max Power: 1600W
    4 Ohm Mono : 400W x 1 RMS
    2 Ohm Mono : 800W x 1 RMS
    1600W Max Power


    I was looking at these: http://www.bestbuy.com/site/olspage...t&productCategoryId=cat03081&id=1099388651574

    But I'm not sure if they will work with the amp... because in order to get all 800 watts dont the subs have to be DUAL 2ohm rather than just 2ohm operational?

    will they work? if not, could you reccomend me some? :o

    I've had that amp before and it worked flawlessly, lots of power and I can get it brand new for very cheap. ($120) So I'd like to stick with that amp due to its price and find subs that will fit it. 10'' and about the same price range.

    TIA :hsd:
     
  2. Jay487

    Jay487 What's Life If You Ain't Enjoyin' It?

    Joined:
    Dec 11, 2001
    Messages:
    4,126
    Likes Received:
    0
    Location:
    Syracuse, NY
    assuming I am correct about the subs not working (at least not at 2 ohms)...


    would these work?
    http://cgi.ebay.com/2-JL-AUDIO-10W3...715966036QQcategoryZ39771QQrdZ1QQcmdZViewItem

    work meaning : 400 watts to each sub at 2ohms.

    I do not know how to wire this, I will have it professionally done, but I want to make sure I am purchasing equipment that is compatible and that will use all of the available wattage.
     
  3. JRock10

    JRock10 Active Member

    Joined:
    May 25, 2005
    Messages:
    7,751
    Likes Received:
    0
    Location:
    Nashville, TN FTW
    ibinternetbrands
     
  4. JRock10

    JRock10 Active Member

    Joined:
    May 25, 2005
    Messages:
    7,751
    Likes Received:
    0
    Location:
    Nashville, TN FTW
    both of them will work. i'd do the JLs over the Type E's but either will work. and that amp will never see anywhere near 1600 watts
     

Share This Page