Discussion in 'On Topic' started by Willie J, Jul 11, 2007.
so im gonna whore some pics.
RRA Elite CAR A4
YHM Mid length quad rail
Wilson combat rear
SO nice! I hope to do this in the near future. If you dont me me asking what did it cost you to build w/o the scope and light. Shoot me a PM, thanks.
Yes I am also interested in doing something like this please hit me up with some details.
why is your 68 so far forward, you cant zero it accurately
in my 32" Blackhawk case with Mamba sling. Have a Maglevel on the way. im thinking a suppressor or 3x aimpoint for my next move
i had no problem zeroing it. i have my irons at 100 and my reddot 50. they hit dead on. ill get my targets and take some pics tomorrow
how do ya like that Mamba
really good. has the stabilizing strap to keep the sling from interfering with the optics
Wanna build me one!!!! !?!?!
they really aren't that hard, and it's good to learn how they work by building it yourself (cheaper, as well)
Lowers are stupidly easy to build, especially if you have somewhat more patience and mechanical inclination than I do. I build mine using a (glass!) kitchen table, a CD stand (as a workbench whenever I needed to hammer on something), some electrical tape to protect the finish, a small hammer, a small square-drive screwdriver (for lack of a centerpunch), some needle-nose pliers, a castle nut wrench, a hex wrench, and some assistance from richk. Depending on your dexterity/mechanical inclination and how well things go, it will take 30 minutes to 2 hours to finish.
I don't know how difficult it is to build uppers, but I hear they're not too difficult to build if you buy a set of go/no-go gauges for spacing the barrell and an armorer's wrench (displaces the dedicated castle nut wrench).