Dynoed my Fox

Discussion in 'OT Driven' started by Chadnel25, Apr 30, 2007.

  1. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    448whp on a mustang dyno. 93 octane street tune. cant wait to pick it up this weekend. im pretty happy with it

    Stock Bottom end
    Twisted Wedge heads
    FMS 1.6 Rockers
    Cobra upper and lower intake manifold. ported lower by http://www.tmossporting.com/
    BBK 70mm Throttle body
    SCT 2400 90mm MAF
    42# Injectors
    Cam card attached
    Vortech S-Trim with 3.33" blower pulley, 8" crank pulley
    AFM power Pipe
    Powermaster Alt
    MSD Digital 6 ignition
    MSD Blaster Coil

    think thats about all that would matter power wise. but anyway...

    3:73's
    Tremec TKO transmission
    Spec Stage 2 Clutch
    Steeda Tri-ax
    Lakewood bellhousing
    Kenne Brown Subframes
    AEM Wideband 02
    Moser Axles

    [​IMG]
     
  2. <Mark>

    <Mark> A flute without holes, is not a flute. A donut wit

    Joined:
    Oct 27, 2001
    Messages:
    8,961
    Likes Received:
    1
    Location:
    On the course.
    Very nice. Makes me wish I wasn't so poor so I could fuck with mine more.
     
  3. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    wish i wasnt so poor cause i fucked with mine so much
     
  4. MeanGreen

    MeanGreen New Member

    Joined:
    Sep 7, 2006
    Messages:
    5,853
    Likes Received:
    1
    Location:
    Annapolis, MD
    werD, i'm in that situation right now and the bitch still isn't finish:ugh2:
     
  5. 311-420

    311-420 New Member

    Joined:
    Sep 28, 2005
    Messages:
    370
    Likes Received:
    0
    Location:
    San Marcos, muthafuckin Texas
    fucking nice man! 450rwhp in a fox is ridiculous. fuck someone up for me, im still waiting for my new computer.
     
  6. Corz

    Corz ha ha! snikt

    Joined:
    Mar 22, 2006
    Messages:
    11,023
    Likes Received:
    0
    Location:
    Connecticut
    I think we're all in that boat


    :crying:
     
  7. pathOFdisaster

    pathOFdisaster Resident Ford Troll OT Supporter

    Joined:
    Aug 5, 2005
    Messages:
    25,113
    Likes Received:
    228
    Location:
    Delaware
    those are great numbers for a stock bottom end, however I wouldnt attempt to push much more power...our blocks like to crack right around 450-500 whp... Im curious as to what my 92LX will dyno once it gets tuned and a trans.. 306 DSS pro-x, f-cam, systemax upper lower, afr185s, and an s-trim ~15psi...
     
  8. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    what pullies? i have an 8" crank and the stock 3.33" on the blower. they say to go to the 8" lower to reduce belt slippage. he told me i see about 12psi of boost on my setup. which isnt bad with how well the heads and intake flow. not to mention the power pipe

    did you look at the impellar calculator through votech yet to see if you will be overspinning it?

    http://www.vortechsuperchargers.com/support.php?support_section=Impeller Speed Calculator

    i had a 2.95" pulley for it too, but at 6k rpm i would be overspinnging the blower by almost 10,000.

    the impellar speeds on S-trims are like 50,000



    eh who cares about pushing power?? when the block cracks i get to upgrade :big grin:
     
  9. jabibbins

    jabibbins OT Supporter

    Joined:
    Sep 20, 2006
    Messages:
    696
    Likes Received:
    0
    Location:
    Bay Area, California
    is there anyway to make these fox's tear the backroads up? I'm about to get one, I want to focus on suspension and handling, bad idea? I mean I never see mustangs on the backroads, just imports...
     
  10. 396Hawk

    396Hawk Active Member

    Joined:
    Aug 11, 2005
    Messages:
    1,284
    Likes Received:
    0
    Any car can be built to carve corners.
     
  11. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    that and kenny brown
     
  12. victimizati0n

    victimizati0n New Member

    Joined:
    Jun 16, 2005
    Messages:
    47,046
    Likes Received:
    0
    where in pittsburgh do you live?

    where did you get the dyno at? how much was it
     
  13. GH0ST

    GH0ST Active Member

    Joined:
    Jul 5, 2003
    Messages:
    43,869
    Likes Received:
    5
    Location:
    MN
    Fucking nice man, that thing has got to haul balls.
     
  14. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    I live in the North Hills, behind Perrytown Tavern.

    was dynoed and tuned by crt performance in norwalk ohio.

    www.crt-performance.com
     
  15. victimizati0n

    victimizati0n New Member

    Joined:
    Jun 16, 2005
    Messages:
    47,046
    Likes Received:
    0

    really? interesting, im surprised i havent seen your car around, i pass there every day

    i still need to learn how to get to babcock from back there instead of going around and taking 3 degree
     
  16. Chadnel25

    Chadnel25 Member

    Joined:
    Nov 18, 2002
    Messages:
    949
    Likes Received:
    0
    Location:
    Pittsburgh PA
    turn after the funeral home. go around the bend there and take the 2nd left. bernice. will take you the entire way down to babcock.

    my car sits in the garage alot. prob have seen me in my GTP around though. where you from in pgh?

    now that it's tuned and running good. it should be out alot more.
     
  17. AlcoLOLic

    AlcoLOLic New Member

    Joined:
    Dec 22, 2006
    Messages:
    4,087
    Likes Received:
    0
    Location:
    Under the bridge on your way home
    Log onto Corner Carvers and ask the same question there. They should be VERY helpful.:cool:

    http://corner-carvers.com/forums/index.php?
     

Share This Page