dyno results in.. wtf is wrong

Discussion in 'OT Driven' started by AcidAngel_5.0, Aug 26, 2003.

  1. AcidAngel_5.0

    AcidAngel_5.0 Pure 0wnage

    Joined:
    Mar 14, 2002
    Messages:
    1,372
    Likes Received:
    0
    Location:
    Atlanta
    okay.. so when i get to the shop the car had already made 3 pulls

    211, 217, and 223 were the rwhp..
    i was like woah.. dipshit slow as fuck calling

    best run was at 245 with 288 tq 15* initial timing
    later pumped it up and down just a tad and runs were 222/223
    so.. as you can see somethign is off bad :wtc:

    so.. im only off by around 50 - 70hp

    everything seems to be running fine.. have A/F of around high 11 - low 12's throughout the whole run.. we are tryin to figure out wtf is goin on though

    gonna check timing chain sprocket tomorrow and see if it is lined up perfectly
     
  2. Possum Stomper

    Possum Stomper The Great Bird of the Galaxy

    Joined:
    Sep 11, 2002
    Messages:
    3,129
    Likes Received:
    0
    Location:
    St. Louis MO
    man that sucks, good luck :sadwavey:
     
  3. Aaron74

    Aaron74 Guest

    What are the specs of your motor??
     
  4. matrix243

    matrix243 My body, is ready.

    Joined:
    May 15, 2001
    Messages:
    18,863
    Likes Received:
    38
    Location:
    Calgary
    Assuming a T5? What percentage for drivetrain loss with estimated hp?
     
  5. AcidAngel_5.0

    AcidAngel_5.0 Pure 0wnage

    Joined:
    Mar 14, 2002
    Messages:
    1,372
    Likes Received:
    0
    Location:
    Atlanta
    heres what i put on

    88' Gt (140k miles)
    TFS track heat heads
    TFS street heat intake
    TFS Stage 1 cam
    Pro-M MAS conversion 75mm bullit
    Holley 190 fuel pump
    3.73 gears
    KFPR
    70mm TB
    Crane 1.6rr
    Lucas 24# injectors
    Underdrive pullies
    BBK unequal shorties
    H-flow h-pipe
    2 chamber flows
    Tremec 3550
    Aluminum driveshaft
     
  6. Aaron74

    Aaron74 Guest

    Well, It seems you're fuel curve was a little on the rich or lean side..I forget which way it goes. You want to stay as close to 14.7 ( i believe maybe it's 12.7).

    But your power does seem a little low for some reason. If your induction set up is all TFS for the most part it seems it would all be matched up just fine.
     
  7. AcidAngel_5.0

    AcidAngel_5.0 Pure 0wnage

    Joined:
    Mar 14, 2002
    Messages:
    1,372
    Likes Received:
    0
    Location:
    Atlanta
    car is done and fixed all the bugs..

    car made 282/330 hp/tq on the dyno.. torque lil bastaRD :x:
     
  8. My84Z

    My84Z New Member

    Joined:
    Sep 13, 2002
    Messages:
    483
    Likes Received:
    0
    it's a ford what did you expect? lol j/k congrats on the fix
     

Share This Page