GUN cz52 owners-please help me.

Discussion in 'On Topic' started by Dranian, Jul 6, 2005.

  1. Dranian

    Dranian (..)

    Joined:
    Oct 12, 2002
    Messages:
    1,305
    Likes Received:
    0
    Location:
    Pembroke Pines, FL Posts: 56,019
    I got a new barrel recently and the rollers suck but I also got new rollers. I can't figure out how to remove the rollers from the cam so I can replace them. Anybody done this? Can you explain how to do it?
     
  2. soccaian

    soccaian New Member

    Joined:
    Oct 6, 2003
    Messages:
    28,859
    Likes Received:
    0
    the best i can do is tell you how to remove the barrel... from there, i have no idea.

    sorry. :hs:
     
  3. Dranian

    Dranian (..)

    Joined:
    Oct 12, 2002
    Messages:
    1,305
    Likes Received:
    0
    Location:
    Pembroke Pines, FL Posts: 56,019
    yeah i got that far. I removed the barrel and seperated it from the recoil spring, then slid the cam forward so the rollers can slide inwards freely. but thats as far as I can come up with.
     
  4. Ivy Mike

    Ivy Mike New Member

    Joined:
    Jul 27, 2002
    Messages:
    119,226
    Likes Received:
    0
    Location:
    Las Vegas, NV
  5. Dranian

    Dranian (..)

    Joined:
    Oct 12, 2002
    Messages:
    1,305
    Likes Received:
    0
    Location:
    Pembroke Pines, FL Posts: 56,019
  6. huntz0r

    huntz0r New Member

    Joined:
    Apr 18, 2005
    Messages:
    15,951
    Likes Received:
    0
    Location:
    Charlotte, NC
    You probably need to just take it to a gunsmith to replace the rollers. I'm told by my friend who owns a CZ-52 that it takes three pairs of hands to get those bastards back in once removed.
     
  7. Dranian

    Dranian (..)

    Joined:
    Oct 12, 2002
    Messages:
    1,305
    Likes Received:
    0
    Location:
    Pembroke Pines, FL Posts: 56,019

    ok, I'll just take it to a gunsmith I guess. I was hoping to do all the modifications myself but if i'm taking it to a gunsmith I'll just let him do all the modifications I had planned. He'll probably do a better job and not break anything. I also don't want to have to take off the hogue grip and put that back on myself when I install the new slide release. Those things are annoying as hell to put on. Thanks for the advice.
     

Share This Page