Computer Won't startup

Discussion in 'OT Technology' started by MOGACAM921, Jul 14, 2004.

  1. MOGACAM921

    MOGACAM921 New Member

    Joined:
    Aug 13, 2003
    Messages:
    45
    Likes Received:
    0
    I changed the memory share setting in my bios. I think I may have changed it to none or something of that sort. Now when I go to start up my computer their is no signal to the monitor and it starts beeping. Is their anything i can do to fix it.
     
  2. Brian

    Brian New Member

    Joined:
    Mar 22, 2004
    Messages:
    12,116
    Likes Received:
    0
    Location:
    The 949
    memory may be fried or the processor
     
  3. MOGACAM921

    MOGACAM921 New Member

    Joined:
    Aug 13, 2003
    Messages:
    45
    Likes Received:
    0
    How do I check?
     
  4. Keyzs

    Keyzs OT Supporter

    Joined:
    Nov 3, 2003
    Messages:
    814
    Likes Received:
    0
    Location:
    Charlotte, MI
    Reset the BIOS/CMOS. Usually done with a pin switch on the mother board. Find the motherboard model number and it should be fairly easy figure out how reset it using GOOGLE.

    That will reset the BIOS back to factory default and you will need to figure out to reset it for the hardware you have... But it will boot if you did not damage anything (which I doubt you have done unless there is something your not telling us.)
     

Share This Page