Bought some stuff, need some advice

Discussion in 'That'll Buff Right Out' started by matsuya, Feb 10, 2008.

  1. matsuya

    matsuya Active Member

    Joined:
    Oct 21, 2003
    Messages:
    24,332
    Likes Received:
    0
    Bought a UDM with LC CCS 5.5" Pads (cutting to finessing). My car has already been detailed with Menzerna SIP and the final polish and topped with S100. I just need to maintain it.

    I'm going to wash it tomorrow and use Pink Moose with a polishing pad and then use a finishing or finessing pad to apply CMW. I also have some Opti-Seal, should I incorporate it anywhere in the process?

    I have CK Quickshine as well. Do I use that after I put on the CMW. If so, do I have to wait for the CMW to cure.

    Also, do I need to wet the pads with Quickshine before I use them? For my wheels I was thinking of using Poli-Seal and Opti-Seal, is that good?
     
  2. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,241
    Likes Received:
    790
    Location:
    Home of the Texas Rangers
    1. PM + CMW = very wet. Wait a week and a wash, then apply Opti-Seal, works best that way.

    2. Use Quikshine on your glass and to maintain the finish between waxing.

    3. Pink Moose has enough oils that you don't need to pre-wet the pads.
     
  3. matsuya

    matsuya Active Member

    Joined:
    Oct 21, 2003
    Messages:
    24,332
    Likes Received:
    0
    Thanks. After I wait a week and apply the Opti-Seal, what do I do after the next wash? Apply CMW again or Opti-Seal again?
     
  4. Scottwax

    Scottwax Making detailing great again! Moderator

    Joined:
    May 5, 2000
    Messages:
    160,241
    Likes Received:
    790
    Location:
    Home of the Texas Rangers
    Either one of those two or Quikshine.
     
  5. matsuya

    matsuya Active Member

    Joined:
    Oct 21, 2003
    Messages:
    24,332
    Likes Received:
    0
    How about sealing the wheels?
     
  6. exceldetail

    exceldetail New Member

    Joined:
    May 2, 2005
    Messages:
    174
    Likes Received:
    0
    I'd try Optiseal on the wheels (If theyre CC'd)
    The Nubas or oils in the remainder of your products wont last.....
     

Share This Page