Big problems installing system...

Discussion in 'OT Technology' started by Lateralus, Aug 9, 2002.

  1. Lateralus

    Lateralus New Member

    Joined:
    Sep 4, 2001
    Messages:
    5,953
    Likes Received:
    0
    Location:
    Midwest
    Ok here's the problem we weren't getting any sound out of any of the in-car speakers but the subs are working, that's the first problem. We weren't sure what was going on, so we started switching the RCA's around in the crossover, but nothing changed, so we're still stuck there.

    The second problem is, as we were messing with the RCA's, at one point we touched one of the RCA's to another one and heard some popping noises and everything shut off. All the fuses on the amps are fine and the fuses for the vehicle are fine, we took the deck out and the fuse on that was blown, it's a 10 amp fuse, so we replaced it and everytime we put a new one in and plug everything back in the fuse blows again.

    I apologize for this being kinda long, and rambling, but we're not sure what to do, please help if you can, thanks.
     
  2. flynfrog

    flynfrog Cool isnt Cheap

    Joined:
    Jul 16, 2001
    Messages:
    6,621
    Likes Received:
    6
    Location:
    Utah
    you fried the deck it sounds liek or elase you ahve soem kind of a short in your rcas
     
  3. LOUDSYSTEM

    LOUDSYSTEM Guest

    what kind of deck is it?

    some decks have an internal fuse for the amp and also how new is it? you could bring it back to the store and get it fixed if something went wrong with it.

    have you used another deck to test the amps that didnt work?
     

Share This Page