What do you guys think of the Alpine Subs? Mine were stolen last night and I'm in the market for new ones. I'm looking at the 10" ones. Here are the specs. My knowledge is really limited and I don't really know know what's good. Diaphragm Material : Kevlar Reinforced Pulp Magnetic Weight : 64oz. Mounting Depth (top mount) : 152mm (6”) Mounting Diameter (top mount) : 231mm (9-3/32”) Recommended Box Types : Sealed/Vented/Bandpass Recommended Sealed Box Volume : 0.55 – 0.8 cu. ft. Spider Material : Nomex Voice Coil Diameter : 50mm Power Handling Power Handling Capacity (Peak) : 1000W Power Handling Capacity (RMS) : 300W Thiel Small Parameters Coil Height (Hvc) : 37.74mm Cone Area (Sd) : 320.47 sq. cm D.C.Coil Resistance (Re) : 3.6 ohm + 3.6 ohm Electrical Q (Qes) : 0.43 Equivalent Suspension Stiffness (Vas) : 29 liters(1.02cu.ft.) Free Air Resonance (Fs) : 30Hz Frequency Response : 28Hz - 1kHz Gap Height (Hag) : 10mm Impedance (Nominal) : 4 ohm + 4 ohm Inductance (Le) : 3.92mH at 1kHz (1.39mH at 20kHz) Linear Excursion (X linear) : 13.87mm Maximum Excursion (X peak) : 27.7mm Mechanical Excursion (Peak-to-Peak) : 55mm Mechanical Q (Qms) : 8.76 Sensitivity : 85 dB/W/M Total Loudspeaker Q (Qts) : 0.41 I'm thinking about even getting Alpine amps.