7900 gs crew

Discussion in 'OT Technology' started by Sex Machine, Dec 28, 2006.

  1. Sex Machine

    Sex Machine New Member

    Joined:
    Jun 26, 2003
    Messages:
    17,759
    Likes Received:
    0
    Location:
    SoCal
    [​IMG]

    The power cable to the video card. Am I suppose to plug in both or just one of them? If just one of them...why would they have 2 cables?
     
  2. Doc Brown

    Doc Brown Don't make me make you my hobby

    Joined:
    Mar 31, 2006
    Messages:
    16,404
    Likes Received:
    0
    Location:
    Ohio
    It has two cables probably because it's an adapter.

    If your power supply has that connector on it, then pitch that adapter cable and use the one from your power supply.

    Oh, and if your psu does not have that connector, use the adapter with just one
    connector. That will be plenty of voltage to power your card.
     
  3. Sex Machine

    Sex Machine New Member

    Joined:
    Jun 26, 2003
    Messages:
    17,759
    Likes Received:
    0
    Location:
    SoCal
    Thanks :bigthumb:
     
  4. Doc Brown

    Doc Brown Don't make me make you my hobby

    Joined:
    Mar 31, 2006
    Messages:
    16,404
    Likes Received:
    0
    Location:
    Ohio

    I'm hoping you have that connector on your psu. Because I just thought about it, and they could configure that adapter wire several ways.

    If you are using the adapter, trace the wires from the molex plugs to the 6pin plug.
    Check to see if the wires from both molex connectors are requiered to be used at the same time.

    I don't think they would have needed to do it that way, but you never know.
     

Share This Page