This fellow stang owner and Ford mechanic did the install for a case of beer. I didn' know if he wanted his face on teh intranet. My weird strut brace with included camber plates. We realigned the camber by refering to the original plate marks when wwe reinstalled the brace. It idled perfectly right away. One issue that maybe someone can help me with. I took if for a spin after the install and after a short burst of throttle I came to a stop and found a fluid causing smoke on the driver side header. There's quite a bit of fluid. I don't think it's the head gasket because I still have full power, and the fluid seems to spray out only at WOT. I think it might be oil, the smoke is white. I just had an oil change earlier but this was not happening. I can't see where it's coming from.