600 to 1000 tail conversion?

Discussion in 'OT Driven' started by DoucheBag, Jun 28, 2008.

  1. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    what would it take to mount a 1000RR tail to a 600RR? 2007 model btw.

    i really dont care for (or they havent designed one yet) the undertails/fender eliminator kits that are available for the 600. so many options for the 1K.. even the 08's... havent seen much of anything aftermarket for the 600's
     
  2. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    anyone?
     
  3. laydback

    laydback New Member

    Joined:
    Jan 18, 2002
    Messages:
    6,745
    Likes Received:
    0
    Location:
    CT

    i have an 08 cbr600rr... i went with the jneer setup which is almost identical and is a very easy install

    [​IMG]
     
  4. Boudreaux

    Boudreaux Active Member

    Joined:
    Aug 26, 2002
    Messages:
    63,081
    Likes Received:
    0
    Location:
    DFW, Texas
    more pics :eek5:
     
  5. laydback

    laydback New Member

    Joined:
    Jan 18, 2002
    Messages:
    6,745
    Likes Received:
    0
    Location:
    CT

    of the tails or the bike?
     
  6. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    see, i modified an 06 tail light like that to fit under mine, but its barely visible, so i went with w different one. everyone who rode behind me said they couldnt see my brake like very well, and living in Miami.. i need my brake light to be as clear as possible
     
  7. laydback

    laydback New Member

    Joined:
    Jan 18, 2002
    Messages:
    6,745
    Likes Received:
    0
    Location:
    CT
    mine has full led tails and blinkers and they are rediculously visable at night...that picture was taken on a sunny as can be day at around 11:30 am...visability is fine
     
  8. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    well the one i had was rather bright as well, but i meant actually being able to see the light. the majority of it was covered from either the angle of the tail, or the exhaust. i just didnt trust it. but the 1K tail is completely visible.. thats why i wanted to know if it were possible to mount it on my bike
     
  9. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    or better yet... what about the 03-06 (I think) tails? werent they styled like the 1000? just a little narrower?

    edit:: and its also not so much just hte brake light im interested in.. but just accesories in general. Hotbodies has a really nice undertail kit im interested in... but they stop at the 06 for the 600.. but they have versions out for the 08 1000RR already.
     
    Last edited: Jun 29, 2008
  10. laydback

    laydback New Member

    Joined:
    Jan 18, 2002
    Messages:
    6,745
    Likes Received:
    0
    Location:
    CT
    people have been doing custom installed of the 1000cbr lights but the exhaust is really in the way...if you have an aftermarket slip on you can create some extra room but even then an inch at most...
     
  11. DoucheBag

    DoucheBag New Member

    Joined:
    Aug 14, 2003
    Messages:
    19,803
    Likes Received:
    0
    Location:
    Miami Fl.
    thats pretty much what i had before i switched to a different one that i have on the bike now. but like i said.. its not just the tail light... its other options available that i want.. like an undertail kit. they dont have one for the 07 600. knew i shoulda just bought a 1000 instead of the 600 :o
     

Share This Page